Test weight—vehicle to pole test 每个测试车辆都应该加载至未加载时加上136kg或它的额定载货量和它的行李容量(取较小值)再加上必要的假人质量。任何附加的测试设备都应该远离碰撞区域。 当车辆处于准备好的状态时,在每个轮子的正上方,确定测试车辆的车身上水平面和标准参考点的距离。贮备好的状态就是加满油,充...
试验应该按照SocietyofAutomotiveEngineersRecommendedPracticeJ921,‘‘InstrumentPanelLaboratoryImpactTestProcedure,’’用指定的试验设备或者满足SocietyofAutomotiveEngineersRecommendedPracticeJ977要求的试验设备,”InstrumentationforLaboratoryImpactTests”,除了: (a) 处于最高位置的座椅机构的切线端点应该在距离穿过右后指定乘坐...
FMVSS201使用手册中文版FMVSS 201U Upper Interior Head Impact ProtectionS1目的和范围旨在规定碰撞过程中的乘员保护S2实施对象乘用车多功能乘用车卡车和整备质量不超过4536kg的车辆。S
试验应该按照Society of Automotive EngineersRecommended Practice J921, ‘‘Instrument Panel Laboratory Impact Test Procedure,’’用指定的试验设备或者满足Society of Automotive Engineers Recommended Practice J977要求的试验设备,“Instrumentation for Laboratory Impact Tests”,除了: (a)处于最高位置的座椅机构的切线...
Free motion headform means a test de- vice which conforms to the specifica- tions of part 572, subpart L of this chapter. Mid-sagittal plane of a dummy means a longitudinal vertical plane passing through the seating reference point of a designated seating position. Motor Home means a motor...
201 OCCUPANT PROTECTION IN INTERIOR IMPACT. S8.18 Adjustable seats-vehicle to pole test. Initially, adjustable seats shall be adjusted as specified in S6.3 of Standard 214 (49 CFR 571.214). S8.19 Adjustable seat back placement-vehicle to pole test. Initially, position adjustable seat backs in ...
试验应该按照SocietyofAutomotiveEngineersRecommendedPracticeJ921,‘‘InstrumentPanelLaboratoryImpactTestProcedure,’’用指定的试验设备或者满足SocietyofAutomotiveEngineersRecommendedPracticeJ977要求的试验设备,“InstrumentationforLaboratoryImpactTests”,除了: (a) 处于最高位置的座椅机构的切线端点应该在距离穿过右后指定乘坐...
FMVSS 201-2020 标准号:FMVSS 201-2020 检测标准/方法:乘员在车内碰撞时的防护 FMVSS 201-2020 S5、S8、S9、S10 检测对象:汽车 检测项目/参数:自由飞行头型冲击试验 相关标准 《IEC61851-21-1:2017EN61851-21-1:20175.3.3》电动汽车导电充电系统第21-1部分:电动汽车车载充电器交流/直流电源导电连接的电磁兼容...
It is adjustable lon- GB11552-2009 gitudinally (e.g. on a T-slot base plate) as well as rotating the IP FMVSS 201 along around the Y-axis. Similar Test System Performance: Control System Data Analysis: Weight of Impactor 6.8 kg Like all Microsys products, the ...
FMVSS 201 - Occupant Protection in Interior Impact § 571.201 S6.4.1.2.2 Press the assembly against the outer face of a test drum with a diameter of 1.70 m + 1%. S6.4.1.2.3 Apply to the test axle a load equal to 100% of the tire’s maximum load carrying capacity. S6.4.1.2.4 ...