It has the write-protection and read-protection feature for the embedded flash memory to protect against unwanted writing and/or reading. The device also features overtemperature and undervoltage lockout protections and can be put into standby mode to reduce the power consumption. The device provides...
I've successfully flashed and debugged my board many times but today flash verification failed and after that I can't connect to it anymore. A similar problem happened once before on another unit and there I concluded that the flash was write protected through the option bytes and it wasn'...
ST is launching today six new STM32G0s.TheSTM32G0C1,STM32G0B1, andSTM32G0B0are the first in the series to support two CAN-FD buses. They’re also the first to support USB-C Power Delivery (PD) as well as USB Full speed data transfer, and they’re inaugurating a new Flash capacit...
The devices incorporate a memory protection unit (MPU), high-speed embedded memories (144 Kbytes of SRAM and 512 Kbytes of flash program memory with read protection, write protection), DMA, an extensive range of system functions, enhanced I/Os, and peripherals. The devices offer standard ...
• Proprietary code readout protection (PCROP): a part of the Flash memory can be protected against read and write from third parties. The protected area is execute-only: it can only be reached by the STM32 CPU as instruction code, while all other accesses (DMA, debug and CPU data ...
example, the communication peripherals contain APIs to initialize and configure the peripheral, manage data transfers in polling mode, handle interrupts or DMA, and manage communication errors. The HAL drivers are feature-oriented instead of IP-oriented. For example, the timer APIs are split into ...
Dual/Single Bank configuration in STM32G4xx_256.FLM. Updated the Flash category 3 (512kB) with one FLM that supports the D/S Bank config. FrameworkCubeMX_gpdsc.ftl: Added support for Timebase Source TIMx Updated example: Terminating app_main thread with osThreadExit() to avoid endless ...
For example just before that pin write I check whether the pin is set or not: Code: [Select]if ( (HAL_GPIO_ReadPin(DISP_PW_O_GPIO_Port, DISP_PW_O_Pin)) == 1 )And, sorry I missed to tell that I have the ST Link/V2 as a debugger connected to the board.Does the following ...
Dual/Single Bank configuration in STM32G4xx_256.FLM. Updated the Flash category 3 (512kB) with one FLM that supports the D/S Bank config. FrameworkCubeMX_gpdsc.ftl: Added support for Timebase Source TIMx Updated example: Terminating app_main thread with osThreadExit() to avoid endless ...
• Proprietary code readout protection (PCROP): a part of the Flash memory can be protected against read and write from third parties. The protected area is execute-only: it can only be reached by the STM32 CPU as instruction code, while all other accesses (DMA, debug and CPU data ...