12、重启交换机后,查看“System Summary”,“Boot Version”已由“1.0.0.4”改为“1.3.5.06”。 13、在“Upgrade/Backup Firmware/Language”中,“Transfer Method”选择“via TFTP”,“Save Action”选择“Upgrade”,“File Type”选择“Firmware Image”。在“TFTP Server”中输入“192.168.1.1”,“Source File N...
The first item on my list was to perform a series of firmware image and boot code updates fromCisco’s website. Here are the versions I used, which were the latest and greatest and the time: Firmware Image version 1.4.0.88 Boot Code version 1.3.5.06 Start by downloading the latest firmwa...
Solved: Hello, I have a basic configuration on this SG300-52 : L3 is enabled Latest Firmware is installed (1.4.0.88) VLAN1 IP is 10.0.0.1 /24 A PC is connected to switch port 1 (with IP 10.0.0.3) VLAN99 IP is 192.168.0.2 /29 A router is connected to
Could anybody please help out with the debug password of the SG300-xy switches with firmware 1.3.0.62 please?Thank you very much in advance for your help and response!Best regardsMatthias I have this problem too Labels: Small Business Switches ...
30、单击“Administration”-“Reboot”,“Reboot”中选择“Immediate”,单击“Reboot”按钮,重新启动交换机。 31、重启后再次登录设备。单击“Status and Statistics”中的“System Summary”,查看当前的“firmware version (Active Image)”已修改为1.4.1.3。 转载于:https://blog.51cto.com/mamaosheng/1734369...
SG300-10 on 1.3.7.18 Firmware has Double-Login On SSH https://supportforums.cisco.com/discussion/12296596/sg300-10-13718-firmware-has-double-login-ssh it refers to this pdf on page 470 http://www.cisco.com/c/dam/en/us/td/docs/switches/lan/csbms/sf30x_s...