Solved: Hi all, I have in my hand an sg300-28p with firmware 1.3.0.62 and bootloader 1.1.0.6. I want to put it in the latest version ( I'm aware of the in-between I have to do because of new bootloader version) but I don't see any firmware for my
i am trying to update my SG500 and SG 300 series switch to latest firmware. currently running in 1.3.0.62 and planning to upgrade to 1.4.11.5. i have downloaded the firmware from cisco portal sx500_fw-14115.ros. while performing i am getting an below error. kindly suggest how can i ...
Solved: Hello all. I was updating an SG300-52P I picked up used. I own a dozen other SG300 variations, and have had no issues with firmware updates. This time, I was updating the firmware, and before rebooting, chose reset startup config. Now the
Elevate your network performance with our selection of switches specifically designed for small businesses. Supported model families: CBS, SG, SF, SX
Should i be concerned doing the firmware upgrade remotely? I.e. remote to a local workstation and connecting to SG 300-28P from that workstation over LAN and doing firmware upgrade using WebGUI (Google Chrome)? I've done the multiple upgrades on these switches this way and neve...
System Description: SG300-52 52-Port Gigabit Managed Switch Firmware Version (Active Image): 1.4.11.5 Boot Version: 1.3.5.06 Configured it like this configure interface vlan 1 ip address 192.168.7.203 255.255.255.0 no ip address dhcp ip default-gateway 192.168.7.1 end config...
Its really my first foray into a Cisco SMB device - have been trying to configure the SG300 10P for a few days now but to no avail. I have also upgraded to latest firmware 1.3.5.58 and now downgraded back to 1.3.0.62 and the problem resides. I am simply tryin...
System Description: SG300-52 52-Port Gigabit Managed Switch Firmware Version (Active Image): 1.4.11.5 Boot Version: 1.3.5.06 Configured it like this configure interface vlan 1 ip address 192.168.7.203 255.255.255.0 no ip address dhcp ip default-gateway 192.168.7.1 end config...
System Description: SG300-52 52-Port Gigabit Managed Switch Firmware Version (Active Image): 1.4.11.5 Boot Version: 1.3.5.06 Configured it like this configure interface vlan 1 ip address 192.168.7.203 255.255.255.0 no ip address dhcp ip default-gateway 192.168.7.1 end config i...
Upgrading Firmware Image and Boot Code The SG300-52 is auto configured for DHCP. To perform the initial setup, I plugged in one of the switchports into my existing HP V1910-24G switch using an access port configuration. Once the switch acquires a DHCP address, the System light stops flashi...