link-aggregation load-sharing mode dynamic { eligible [ flowlet-gap-time flowlet-gap-time ] | fixed | spray } 缺省情况下,聚合组内采用的聚合静态负载分担类型 11.3 配置缺省聚合负载分担时忽略的字段 当聚合组采用缺省的负载分担类型进行负载分担时,如果负载分担不均匀,用户可以配置本功能忽略报文中的某些字...
Aggregate Interface: Bridge-Aggregation1 Aggregation Mode: Dynamic Loadsharing Type: Shar System ID: 0x8000, 28b7-ea0b-0100 Local: Port Status Priority Oper-Key Flag --- GE1/0/1 S 32768 1 {ACDEF} GE1/0/2 S 32768 1 {ACDEF} Remote: Actor Partner Priority Oper-Key SystemID Flag --...
H3C 交换机配置链接聚合 三层链路聚合配置 interface route-aggregation 2 ip address 192.168.1.1 255.255.255.0 link-aggregation global load-sharing mode destination-ip #ip地址进行负载分担 link-aggregation mode dynamic #动态聚合模式 interface range g0/0/0 to g0/0/1 lacp mode passive port link-aggregat...
[H3C] interface gigabitethernet 1/0/1 # 配置限速参数,端口进/出速率限制为5120kbps。 [H3C-GigabitEthernet1/0/1] qos lr inbound cir 5120 [H3C-GigabitEthernet1/0/1] qos lr outbound cir 5120 < 2>:line-rate [H3C] interface gigabitethernet 1/0/1 [H3C-GigabitEthernet1/0/1]line-rate inb...
14、置为动态聚合模式,则需要在聚合端口视图下配置link-aggregation modedynamic命令。创建完聚合端口后,将多个物理端口加入到聚合组 中。对于动态聚合模式而言,还可以通过配置系统的LACP协议优先级和端口的LACP协议优先级来影响动态聚合组成员的Selected和Un selected状态,具体在此不再介绍,感兴趣的读者可自行查阅相关资料...
在此只对手工汇聚和静态LACP汇聚进行介绍，由于动态LACP汇聚由系统自动进行端口的添加和删除，实际应用较少，在此不做介绍。具体涉及到的配置命令如下：[H3C]link-aggregation group agg-id mode[manual|static][H3C]interface interface-type interface-number [H3C-Ethernet1/0/1]port link-aggregation group agg-id...
[Sysname-Route-Aggregation1] link-aggregation mode dynamic [Sysname-Route-Aggregation1] lacp select speed 1.1.12 lacp system-priority lacp system-priority命令用来配置LACP的系统优先级。 undo lacp system-priority命令用来恢复缺省情况。 【命令】 lacp system-priority priority undo lacp system-priority 【缺...
4.Configure the aggregation group to operate in dynamic mode. link-aggregation mode dynamic By default, an aggregation group operates in static mode. 5.Return to system view. quit 6.Assign an interface to the Layer 2 aggregation group:
S -- Selected, U -- Unselected, I -- Individual Flags: A -- LACP_Activity, B -- LACP_Timeout, C -- Aggregation, D -- Synchronization, E -- Collecting, F -- Distributing, G -- Defaulted, H -- Expired Aggregate Interface: Bridge-Aggregation1 Aggregation Mode: Dynamic Loadsharing Typ...
link-aggregation mode dynamic 组网及组网描述: 2022-10-21提问 举报 (0) 2 个回答 按时间 按赞数 IT钟点工 这是动态聚合 2022-10-21回答 评论(0) 举报 (0) zhiliao_sEUyB 这是配置聚合模式为动态模式。 聚合接口视图下的命令 2022-10-21回答 评论(0) 举报 (0) 编辑答案分享...