int heapSize = ESP.getHeapSize(); // 得到可用空间大小 Serial.print("Total Heap Size: "); Serial.print(heapSize); Serial.println(" Bytes"); int heapFree = ESP.getFreeHeap(); // 得到当前运行命令状态下所剩余尺寸 Serial.print("Free Heap Size: "); Serial.print(heapFree); Serial.println...
configTICK_RATE_HZ//FreeRTOS时钟心跳,也就是FreeRTOS用到的定时中断的产生频率 configMAX_PRIORITIES//程序中可以使用的最大优先级 configMINIMAL_STACK_SIZE//任务堆栈的最小大小 configTOTAL_HEAP_SIZE//堆空间大小;只有当程序中采用FreeRTOS提供的内存分配算法时才会用到 configMAX_TASK_NAME_LEN//任务名称最大...
单位Hz;对不同的移植代码也可能不使用这个参数configTICK_RATE_HZ//FreeRTOS时钟心跳,也就是FreeRTOS用到的定时中断的产生频率configMAX_PRIORITIES//程序中可以使用的最大优先级configMINIMAL_STACK_SIZE//任务堆栈的最小大小configTOTAL_HEAP_SIZE//堆空间大小;只有当程序中采用FreeRTOS提供的内存分配算法...
printf("%"PRIu32"MB %s flash\n", flash_size / (uint32_t)(1024 * 1024), (chip_info.features & CHIP_FEATURE_EMB_FLASH) ? "embedded" : "external");打印最小可用堆大小。printf("Minimum free heap size: %"PRIu32" bytes\n", esp_get_minimum_free_heap_size());接下来的代码段实现了一...
ESP32 S3 - FreeRtos Heap Endby tommyp » Fri Nov 01, 2024 5:43 pm In espidf 4.4.1, the heap end is set to 0x4000000 0x00000010 _esp_flash_mmap_prefetch_pad_size = 0x10 0x00000000 _esp_memprot_prefetch_pad_size = 0x0 0x00000000 _esp_memprot_align_size = 0x0 0x3fcac530 ...
这可能是由于FreeRTOS的堆栈大小限制或内存不足导致的。以下是一些建议来解决这个问题: 1. 检查任务堆栈大小需求:首先,确保任务所需的堆栈大小不超过ESP32-S2的可用内存。如果任务确实需要较大的堆栈,请考虑优化代码以减少堆栈需求。 2. 修改FreeRTOSConfig.h:在FreeRTOSConfig.h文件中,可以调整configTOTAL_HEAP_SIZE...
// API: ESP.getHeapSize() // 本程序Heap最大尺寸(空间总大小) ESP.getFreeHeap() // 当前Free Heap最大尺寸(当前可用剩余空间大小) uxTaskGetStackHighWaterMark(taskHandle) // 计算当前任务剩余多少内存 示例程序: TaskHandle_t taskHandle; // 创建任务的句柄 void setup() { Serial.begin(115200)...
esp_deregister_freertos_idle_hook_for_cpu(other_cpu_startup_idle_hook_cb,!xPortGetCoreID());#endif//[refactor-todo] check if there is a way to move the following block to esp_system startupheap_caps_enable_nonos_stack_heaps();//Now we have startup stack RAM available for heap, en...
printf("Min free heap: %d bytes\n", esp_get_minimum_free_heap_size()); 4. 调整任务堆栈 优化FreeRTOS任务: // 原代码:可能分配了过大堆栈 xTaskCreate(task1, "Task1", 4096, NULL, 1, NULL); // 优化后:通过测试减少到2048 xTaskCreate(task1, "Task1", 2048, NULL, 1, NULL); ...
#include "freertos/queue.h" #include "lwip/sockets.h" #include "lwip/dns.h" #include "lwip/netdb.h" #include "esp_log.h" #include "mqtt_client.h" #include "time.h" #include "sys/time.h" #include "esp_task_wdt.h" #include "driver/uart.h" ...