Booting from a NAND flash device will fail when the C6657/C6655 at full speed. The root cause of the problem is that insufficient time is allowed for the NAND device to complete the initial reset command sent to it by the DSP ROM code. After sending the reset command, the DSP ...
default BOOT_FROM_SNOR config BOOT_FROM_SNOR bool "SPI-NOR" config BOOT_FROM_SNAND_2K_64 bool "SPI-NAND (2K+64)" select MT7629_BOOT_FROM_SNAND config BOOT_FROM_SNAND_2K_128 bool "SPI-NAND (2K+128)" select MT7629_BOOT_FROM_SNAND ...
Dear all, In my application, I used cramfs for my filesystem in the nandflash. While booting from the nand and starting the kernel, found the error logs below: VFS: Mounted root (cramfs filesystem) readonly on device 31:4. devtmpfs: mounted Freeing init memory: 196K cramfs: b...
CONFIG_XWAY_SWAP_BYTES Enable compilation of tools/xway-swap-bytes needed for Lantiq XWAY SoCs for booting from NOR flash. The U-Boot image needs to be swapped if a flash programmer is used. - ARM options: CONFIG_SYS_EXCEPTION_VECTORS_HIGH Select high exception vectors of the ARM core,...
A Design Method of Linux Bootloader Based on S3C2440 of S3C2440 and the staged booting method, a new fast booting Bootloader is designed, which can support dual-boot of NOR Flash and NAND Flash. The... Xianfan XU,Kun ZHANG,Lei XU,... - ICCSEE-13 被引量: 1发表: 2013年 加载更多来源...
But I have problems with flash and booting from flash. If I flash the brcm image via bootloader, it ends up with this: --- CFE> flash -noheader 192.168.11.2:firmware.ram nflash1.trx Reading 192.168.11.2:firmware.ram: Done. 3411968 bytes read Programming...done. 3411968...
I simply removed my old hard disk and inserted the new SSD into the laptop thinking nothing of it. When I tried booting up the laptop, that's when I got the "Boot Device Not Found" message and below it "Please install an operating system on your hard disk." I checked the SSD, doin...
Was playing with the OpenWRT 21.12.5 build the GL-ax1800 Flint from the Chinese forum posted by Blaze: GL-iNet AX1800 OpenWrt firmware Technical Support for Routers openwrt-ipq60xx-generic-glinet_gl-ax1800-squashfs-nand-factory.bin is ubi format itself, upgrade it by uboot, at page ...
NandFlash PCB Version:Ver.A HD PCB Version:Ver.A [SubSlot 0]16GE+8SFP+2XGE (Hardware)Ver.A, (Driver)1.0, (Cpld)1.0 Displaying the electrical label information for the firewall Use the display device manuinfo command to display the electrical label information for the firewall. <Sysname>...
Up to 560 MB/s - SDSSDH3-1T00-G26 and didn't think I would need to do anything before upgrading. Thus, I simply removed my old hard disk and inserted the new SSD into the laptop thinking nothing of it. When I tried booting up the laptop, that's when I got the "Bo...