生成STM32F03C8T6的code后，调试的时候，会提示“ JLink Info: CPU could not behalted”...
昨天调试一块STM32L151的板子,用的是JlinkOB,调试时,出现下面的错误: JLink Error:could not start CPU core. JLink Warning:CPU could not be halted 这个错误出现的原因是,程序中有修改JTAG...
***JLink Error: Can not read register 15 (R15), CPU may not be halted **JLink Warning: T-...
这个片子SW方式能够识别出来芯片但是就是无法下载显示**JLink Warning: CPU could not be halted。
JLINK_IsHalted() returns FALSE (0002ms, 0504ms total)--- 是否开启了看门狗 导致复位、、 ......
**JLink Warning: S_RESET_ST not cleared **JLink Warning: CPU could not be halted Error: Flash...
从您提供的信息来看，没有焊接晶振的情况下使用内部晶振，可能是产生问题的原因之一。在您的代码中，并...
WARNING: CPU did not halt after reset. WARNING: CPU could not be halted WARNING: T-bit of XPSR is 0 but should be 1. Changed to 1. WARNING: T-bit of XPSR is 0 but should be 1. Changed to 1. Connected to target Waiting for GDB connection...Connected to...
**JLink Warning: CPU could not be halted * JLink Info: Reset: Core did not halt after reset, trying to disable WDT. * JLink Info: Reset: Halt core after reset via DEMCR.VC_CORERESET. * JLink Info: Reset: Reset device via reset pin * JLink Info: Reset: VC_CORERESET did not halt...
TARGET: stm32f4x.cpu - Not halted FATAL ERROR: command exited with status 1: openocd -s 'C:/zephyrproject/zephyr/boards/arm/nucleo_f446re\support' -f 'C:/zephyrproject/zephyr/boards/arm/nucleo_f446re\support\openocd.cfg' '-c init' '-c targets' -c 'reset init' -c 'flash write...