STM32开发板用ULIN2 MDK下烧写程序时 Can not enter debug mode 怎么解决?、 跪求大神 擦除一下试试看 另外看看是否程序里面函数禁止调试的代码 ...
STM32H7B3I-DK - unable to flash code to board and enter debug mode Go to solution richi Associate III 2024-02-21 7:07 AM I am using 1.10.0 STM CUBE IDE. Everything was working fine until I unchecked the box to update STLINK firmware. Now it does not...
vMBPortLog( MB_LOG_DEBUG, "MBTCP-ERROR", "Received to many bytes! Droping client.\r\n" ); #endif /* This should not happen. We can't deal with such a client and * drop the connection for security reasons. */ prvvMBPortReleaseClient( pxPCB ); } } } pbuf_free( p ); return...
* This parameter can be one of the following values: * @arg GPIO_Remap_SPI1 : SPI1 Alternate Function mapping * @arg GPIO_Remap_I2C1 : I2C1 Alternate Function mapping * @arg GPIO_Remap_USART1 : USART1 Alternate Function mapping * @arg GPIO_Remap_USART2 : USART2 Alternate Function map...
本章节为大家讲解emWin6.x的裸机方式移植。提供的移植方法支持emWin的多图层配置,多缓冲配置以及各种颜色格式的实现。同时可以自适应我们生产的4.3寸,5寸和7寸的电阻屏和电容屏。 虽然本章节是以我们开发板为例进行移植的,但是教会大家如何移植到自己的板子上以及移植过程中的注意事项是本章节的重点。
(echoclient_pcb,&DestIPaddr, DEST_PORT,tcp_echoclient_connected); } else { /* deallocate the pcb */ memp_free(MEMP_TCP_PCB, echoclient_pcb); #ifdef SERIAL_DEBUG printf("\n\r can not create tcp pcb"); #endif } } tcp_echoclient_connect函数用于创建TCP从设备并启动与TCP服务器连接...
select_mode(): 通过getchar实现选择4种测试模式(需要实现fgetc, USART需要关接收中断) lwiperf_report(): lwiperf发送测试报告函数,lwiperf会在测试发送或者接收到最后一帧时有Server端发送测试报告,例如使用开发板为Client则会接收到上位机Server端的report,开发板为Server则会向上位机发送report。(需要实现fputc) ...
case eDeleted: cStatus = tskDELETED_CHAR; break; default: /* Should not get here, but it is included to prevent static checking errors. */ cStatus 0x00; break; } /* Write the task name to the string, padding with spaces so it can be printed in tabular form more easily. */...
HAL_CAN_Init 122 6.2.6 HAL_CAN_ConfigFilter 122 6.2.7 HAL_CAN_DeInit 123 6.2.8 HAL_CAN_MspInit 123 6.2.9 HAL_CAN_MspDeInit 123 6.2.10 HAL_CAN_Transmit 123 6.2.11 HAL_CAN_Transmit_IT 123 6.2.12 HAL_CAN_Receive 124 6.2.13 HAL_CAN_Receive_IT 124 6.2.14 HAL_CAN_Sleep 124 6.2...
When I go out from debug session, I can't connect anymore to the micro-controller and I can't flash it anymore. I guess that because always when I power on the Hardware, the CPU goes directly in deep sleep mode. I have the issue as described in the screenshot below...