To get set up, just run the Windows version of QuestaSDR on a PC, and open the "SDR Server" app. Once the server is running, you can connect to it via the Android version of QuestaSDR over a network connection.
Use an rtl_tcp server transparently as SoapySDR device. The rtl_tcp protocol lacks many features, like reporting current settings and stream control. Prefer any other module if possible.By default, the module will attempt to discover a local rtl_tcp server. Specify the "rtltcp" key to ...
trusty(1)rtl_tcp.1.gz Provided by:rtl-sdr_0.5.2.7.3ab6-1_amd64 NAME rtl_tcp - an I/Q spectrum server for RTL2832 based DVB-T receivers DESCRIPTION Uses a re-purposed DVB-T receiver as a software defined radio to receive and send I/Q data via TCP network to another demodulation,...
Unlike Android devices, Apple iOS devices can't run RTL-SDRs directly through their USB ports. However, they can still connect to another networked device such as a PC or Raspberry Pi running an rtl_tcp server. In the past we've seen two rtl_tcp clients for iOS released [1,2]. Now ...
This app requires an external rtl_tcp server. iOS devices do not currently support the direct connection of USB peripherals such as an RTL-SDR. Thus, the use of this app requires network access to a server, such as a Raspberry Pi (or Mac), with an RTL-SDR unit plugged into its USB ...
- Connect, via the rtl_tcp network protocol, to an RTL-SDR USB port peripheral device. - Listen to AM, FM, SSB and CW radio signals - View an RF spectrum and waterfall This app requires either a local or remote rtl_tcp server or similar raw IQ tcp server This app can connect to ...
= 1234) return; // This is the requestCode that was used with startActivityForResult if (resultCode == RESULT_OK) { // Connection with device has been opened and the rtl-tcp server is running. You are now responsible for connecting. int[] supportedTcpCommands = data.getIntArrayExtra("...
硬件平台zedboard+ad9361,软件SSDRSharp。 1.修改SSDRSharp的RTL-TCP插件实现千兆以太网的IO数据传输和频率切换,AGC/MGC控制。 2.zedboard上调用libiio库编写了IQ数据tcp_server。目前只能连接一次。第二次连接时需要重启server端口。 3.vs2019编译 4.iq采样率12Mbps基本为最大数据处理量,高于12Mbps SSDRSharp就很...
= 1234) return; // This is the requestCode that was used with startActivityForResult if (resultCode == RESULT_OK) { // Connection with device has been opened and the rtl-tcp server is running. You are now responsible for connecting. int[] supportedTcpCommands = data.getIntArrayExtra("...
Rtl-sdr仅在第一个客户端连接(即节省太阳能等)之后启动。 仅在最后一个客户端断开连接时停止 MacOS和Linux(Debian Raspberrypi) 设计 每个客户端都有自己的dsp线程 每个dsp线程都执行 用于SIMD优化 仅支持RTL-SDR 原料药 在定义 客户端可以连接并发送请求以启动侦听: center_freq-这是必需的中点...