在上面的代码中,rt_thread_create函数的第四个参数1024即指定了线程的堆栈大小为1024字节。 4. RT-Thread堆栈设置的示例代码或步骤 除了在线程创建时设置堆栈大小外,还可以在启动代码或链接脚本中设置系统的堆栈和堆空间。以下是一个在启动代码中设置堆栈和堆的示例: assembly Stack_Size EQU 0x000
动态线程初始化栈的过程,在 _rt_thread_init() 里面的 rt_hw_stack_init()实现。 #ifdefARCH_CPU_STACK_GROWS_UPWARDthread->sp=(void*)rt_hw_stack_init(thread->entry,thread->parameter,(void*)((char*)thread->stack_addr),(void*)rt_thread_exit);#elsethread->sp=(void*)rt_hw_stack_init(th...
*/#include<rtthread.h>#define THREAD_PRIORITY 25#define THREAD_STACK_SIZE 512#define THREAD_TIMESLICE 5staticrt_thread_ttid1=RT_NULL;/* 线程1的入口函数 */staticvoidthread1_entry(void*parameter){rt_uint32_tcount=0;while(1){/* 线程1采用低优先级运行,一直打印计数值 */rt_kprintf("thread1 ...
【02】RT-Thread动态内存堆的使用 在单片机应用中,我们经常提到堆栈这个词,实际上,堆和栈是两个不同的概念 栈(stack):由编译器自动分配释放; 堆(heap):一般由程序员分配和释放。 inta =0;//全局初始化char*p1;//全局未初始化区intmain(void){intb;//栈chars[]="abc";//栈char*p2;//栈char*p3="12...
;* After Reset the Cortex-M3 processorisinThread mode, ;* priorityisPrivileged, and the Stackissetto Main. ;***;*;* <h2><center> COPYRIGHT(c)2017STMicroelectronics</center></h2>;*;* Redistribution and useinsource and binary forms, with or without modification, ;*are permitted provided th...
/* 参数*/void*stack_addr;/* 栈地址指针*/rt_uint32_t stack_size;/* 栈大小*//* 错误代码*/rt_err_t error;/* 线程错误代码*/rt_uint8_t stat;/* 线程状态*//* 优先级*/rt_uint8_t current_priority;/* 当前优先级*/rt_uint8_t init_priority;/* 初始优先级*/rt_uint32_t number_...
LDR R1,[R0]CBZ R1,switch_to_thread/* skip register save at the first time */MRS R1,PSP/* get from thread stack pointer */STMFD R1!,{R4-R11}/* push R4 - R11 register */LDR R0,[R0]STR R1,[R0]/* update from thread stack pointer */switch_to_thread:LDR R1,=rt_interrupt_to_...
1.rt_hw_stack_init调用分析 分析此问题,首先我们需要结合完整版本的 rt-thread 内核代码进行阅读才能更好的充分理解。 在rt-thread内核代码中,初始化线程堆栈的时候其实是有一个宏声明进行选择的,具体代码如下: #ifdef ARCH_CPU_STACK_GROWS_UPWARD thread->sp = (void *)rt_hw_stack_init(thread->entry, ...
rt_thread_create/rt_thread_init --> _rt_thread_init --> rt_hw_stack_init 最后调用到了/libcpu/arm/cortex-a/stack.c文件。 代码语言:javascript 代码运行次数:0 运行 AI代码解释 rt_uint8_t*rt_hw_stack_init(void*tentry,void*parameter,rt_uint8_t*stack_addr,void*texit){rt_uint32_t*stk...
#defineHEAP_BEGIN (__segment_end("CSTACK")) GCC环境下,栈结束地址的获取,如下所示: externint__bss_end; #defineHEAP_BEGIN ((void *)&__bss_end) 四、RT-Thread程序更改 只需要在 board.h 文件中定义相关宏即可,然后修改 board.c 文件中rt_system_heap_init函数 的内存获取地址。