klippy.log I must have a fundamental misunderstanding of how the z_tilt function works. I am in the middle of building a corexy printer with a moving bed. The bed has 3 belt drive axis and is mounted with 3 pivot points. Like so: ---...
[printer]# 运动学结构 分为笛卡尔和corexy等等,Voron2.4是corexykinematics: corexy# 最大速度max_velocity:300# 最大加速度max_accel:3000# z轴最大速度max_z_velocity:15# z轴最大加速度max_z_accel:300# 方形拐角速度,小一点可以有效避免平台重带来的惯性square_corner_velocity:5.0 [bed_mesh]## ...
# 进入配置文件所在目录cd~/printer_data/config# 下载klicky-probe.cfg需要的宏命令wget https://raw.githubusercontent.com/jlas1/Klicky-Probe/main/Klipper_macros/Klipper_macros.zip# 解压unzip Klipper_macros.zip# 解压以后新增的文件klicky-probe.cfg#选择要开启功能的配置文件klicky-variables.cfg#存储Klicky...
multi_z.test out_of_bounds.test polar.test pressure_advance.cfg pressure_advance.test printers.test pwm.cfg pwm.test quad_gantry_level.test rotary_delta_calibrate.cfg rotary_delta_calibrate.test screws_tilt_adjust.cfg screws_tilt_adjust.test sdcard_loop.cfg sdcard_loop.test temperat...
#z_offset: 1.1 speed: 5 samples: 1 #sample_retract_dist: 5 #samples_tolerance: 0.010 #___ SELF LEVELLING (Z_Tilt) ___ #[z_tilt] #z_positions: -38.188,-20.717 138.021,307.493 314.23,-20.717 #points: 20,20 20,260 260,260 230...
Kernel config: zswap zbud z3fold Enabling zswap: either: opkg install zram-swap - will allocate half of ram size to zram0 echo 1 > /sys/module/zswap/parameters/enabled; in /etc/rc.local (if not enabled by default in kernel) or ##inside rc.local swapoff /dev/zram0; echo 1 > /...
在前一节中,已经用过跳线将鲁班猫和主板的串口引脚进行了连接,但是还没有开启鲁班猫0的串口,通过fire-config工具来启用UART8_M0,设置完成后重启,对应的接口是/dev/ttyS8 完成了这些设置以后,就可以根据3D打印机参数,修改Klipper配置文件了。 **网页登录 **http://lubancat ...
variable_start_z_tilt_adjust_at_temp (default: True if z_tilt configured) - If true the PRINT_START macro will run Z_TILT_ADJUST after the bed has stabilized at its target temperature. You can further customize the PRINT_START macro by declaring your own override wrapper. This can be use...
variable_start_z_tilt_adjust_at_temp(default: True ifz_tiltconfigured)- If true thePRINT_STARTmacro will runZ_TILT_ADJUSTafter the bed has stabilized at its target temperature. You can further customize thePRINT_STARTmacro by declaring your own override wrapper. This can be useful for things ...
OPTIONAL: Now you can use Z-Tilt PID tune the bed. Ideally, all PID tuning should occur at the temperatures that you print most at. PID_TEST_BED TEMP=70 SAVE_CONFIG (once completed) PID tune the extruder while part cooling fan runs at 25%. PID_TEST_HOTEND TEMP=245 SAVE_CONFIG (...