**JLink Warning: CPU could not be halted I am using SDK9.0, J-Link Lite-Cortex-M, HW: V8.00, DLL: V4.98C But getting this error just in this project when debugging:debug.txt It was working with this project. not sure if this is caused by new SDK upgrade from 8 to 9 or I did...
***JLink Error: Can not read register 1 (R1) while CPU is running ***JLink Error: Can not read register 2 (R2) while CPU is running ***JLink Error: Can not read register 3 (R3) while CPU is running ***JLink Error: Can not read register 4 (R4) while CPU is running ***JLink...
JLINK_IsHalted() returns FALSE (0002ms, 0504ms total)--- 是否开启了看门狗 导致复位、、 ......
这不是IAR软件的问题，而是JLINK使用了盗版的固件，或者说JLINK本事是个几十块买的盗版当用到原厂Segger公司的JLINKV4.58A软件时，就会报告出来这个非法的问题。
***JLink Error: Can not read register 15 (R15), CPU may not be halted **JLink Warning: T-...
**JLink Warning: CPU could not be halted Target info:--- Device: STM32F107VCT6 VTarget = 3....
* JLink Info: J-Link: Flash download: Flash download into internal flash skipped. Flash contents already match BS \\data_collection\src/initialize.c\12 **JLink Warning: CPU could not be halted ***JLink Error: Can not read register 15 (R15) while CPU is running ...
安装好IAR和Jflash for arm驱动软件，连接好Jlink，给k60供电，设置好IAR工程，编译下载即可。
AP[0]: AHB-AP (IDR: Not set) AP[0]: Core found AP[0]: AHB-AP ROM base: 0xE00FE000 CPUID register: 0x410FD214. Implementer code: 0x41 (ARM) Feature set: Mainline Cache: No cache Found Cortex-M33 r0p4, Little endian. CPU could not be halted Reset: Co...