But if I 'start application' right after I get Dev0 programmed before doing Dev1, Dev0 will prevent JTAG from running properly and lock the chain, throwing out error "could not perform target reset, failed to connect could not perform custom init...
Many microcontrollers require an initialization sequence for different reasons: When powered on, the PLL may not be initialized, which means the chip is very slow, or a watchdog must be disabled manually. To use these chips the user must first perform the required initialization. This dialog all...
When this option is not set, J-Flash will open the most recently used project. If no recently used project could be found, J-Flash generates a default project. |- | -production || Same as -auto |- | -program || Programs the target. |- | -programverify || Programs and verify the...