- Target programmed successfully. - Verifying target (14153728 bytes, 5 ranges) ... - ERROR: Verification failed @ address 0x0000041F (Read: 0x00, Expected: 0x02) - ERROR: Failed to verify target. - Executing exit sequence ... - ERROR: Failed to auto program target. Disconnecting ... ...
AutoPerformsErase = 1 AutoPerformsProgram = 1 AutoPerformsVerify = 1 EnableTargetPower = 0 EraseType = 3 PerformCompare = 1 TargetPowerDelay = 0x000000C8 Display All My goal is to set up project file and use it with command line version of JFlashSPI. Question is: is there a fix/wor...
J-Flash requires a J-Link / Flasher as an interface to the target hardware. It is able to program internal and external flash at very high speeds, upwards of 550KBytes/s depending on the chip. Another notable feature is smart read back, which only transfers non-blank portions of the ...
J-Flash has an intuitive user interface and makes programming flash devices convenient. J-Flash requires a J-Link / Flasher as an interface to the target hardware. It is able to program internal and external flash at very high speeds, upwards of 550KBytes/s depending on the chip. Another n...
but that gave me a error "Read CFI info: unsupported flash type / bus width (10113200), please contact info@segger.com Failed to read CFI info Failed to connect Could not auto program target, not connected" Thanks Labels: Kinetis K Series MCUs 0...