minium gap:最小网格间隙; 在Mesher-HD中,不建议勾选Allow stair-stepped meshing,此功能会要求mesh网格全部垂直正交,会导致圆弧形几何体不贴体; 建议勾选set uniform mesh params,均匀化可以提高网格质量,减少网格数量 其他参数可保持默认,点击Generate 生成网格 Display 显示网格Display...
7、将模型树下装配体放置于模型的下1/4空间,如下图所示: 双击Assembly,打开其编辑窗口,按照下图设置相应的Slack空间,设置此区域的最大网格尺寸,点击Edit,设置装配体中各个器件的多级网格级数为2,勾选Set uniform params,点击Accept,Done。 8、打开划分网格面板,按照下图进行设置,点击Generate mesh, 总共划分了408174...
− Typically leads to a reduced mesh count.明显减少网格数量 "Set uniform mesh params" OFF "Set uniform mesh params" ON 18 © 2017 ANSYS, Inc. Mesh Count = 5.7M November 22, 2017 Mesh Count = 3.4M 3D Multi-Level Meshing: Non-conformal Assemblies • Non-conformal assemblies can ...
• Using Set uniform mesh params can improve CAD meshing o Better resolution and quality on CAD surfaces对CAD表面划分更好的精度 o Typically leads to a reduced mesh count 明显减少网格数量 • Recommended to use this option when multi-level meshing is used 当使用多级网格计算时,务必勾选 • ...
(e) Turn on the Object params option and click Edit. Icepak will open the Per-object mesh parameter 13、s panel, where you will assign object-specifi c meshing parameters to a block, both openings, and all plates. (f) Set object-specifi c meshing parameters for the openings. i. In ...
•Non-conformal meshing Skills Covered:•Basic meshing techniques •Non-conformal meshing •Multi-level meshing •Uniform mesh parameters option Training Method Used:A model with potential for improvement is provided.Then,an approach for improving the model is presented.Feel free to explore the...
? Recommended for assemblies with CAD objects Uniform mesh parameters ignores local mesh controls Mesh with subblocking method Mesh with “Set Uniform Params” on 25 ? 2012 ANSYS, Inc. December 5, 2012 Release 14.5 Mesher-HD: Multi-Level Mesh - 1 ? More generic name is Hanging Node mesh ?
(b) 在 Global settings 下, Mesh parameters 选项中选择 Normal Icepak 将自动更新网格划分的设置。 (c) 打开 Object params 选项并点击 Edit. Icepak 将打开 Per-object meshing parameters 面板, 这里你可以改变每个物体的 网格设置。. 22 (d) 设定所有 plates 的网格 i. 在 Per-object meshing parameters ...
在 Global settings 下, Mesh parameters 选项中选择 Normal Icepak将自动更新网格划分的设置。打开 Object params 选项并点击 Edit. Icepak 将打开 Per-object meshing parameters面板, 这里你可以改变每个物体的网格设置。. 设定所有 plates 的网格在 Per-object meshing parameters 面板, 点击 plate.1, 按住 Shift ...
设置求解变量为FLOW和temperature,打开重力及速度方向,设定环境温度为55℃。选择模型树下所有器件,创建ASSEMBLY,选择mesh separately,输入各个面的Slack数值为5,选择Max element size下的X、Y、Z,分别输入8,8,10,选择set uniform mesh params和Allow multi-level meshing,并对不同的模型输入不同的Max levels,最后进行...