Not sure of feasibility, considering resource limitations of currently supported hardware, but my big wish is to have the "debug agent"/"debug adapter" running on the debug probe along with DAPLink. If DAprotocol could be served over TCP/IP then we'd be able remote debug with nothing more...
Using the J-Link in CMSIS-DAP mode with the MCUXpresso IDE isnot officially supportedand should be considered asexperimental. To use the J-Link with the LinkServer debug connection inside the NXP MCUXpresso IDE, the above vendor ID (0x1366) and Device ID (0x1008) have to be known to the...
echo Cannot be verbose and quiet at the same time. >&2 exit 1 fi MS_PrintLicense case "$copy" in copy) tmpdir=$TMPROOT/makeself.$RANDOM.`date +"%y%m%d%H%M%S"`.$$ mkdir "$tmpdir" || { echo "Could not create temporary directory $tmpdir" >&2 exit 1 } SCRIPT_COPY="$tmpdir/mak...
Copy the CMSIS-DAP_OpenSDA.s19 to the BOOTLOADER device. Repower the board without the reset button pressed. Then the device should show up as ‘OpenSDA CMSIS-DAP’: OpenSDA CMSIS-DAP CMSIS-DAP now does *not* support a virtual COM (USB CDC) port. Such a port is supported by the ori...
It might be useful to check whether it is possible with the V3 because using the factory bootloader for downloading custom code would be a great possibility I think. I do not have device at hand at the moment, but I will look after the possibilities later. I just opened this issue to ...
For those that are not familiar with the mbed, it is an “Arduino-like” development platform for small microcontroller embedded systems. The variant I’m using is built using an NXP LPC1768 Cortex-M3 device, which offers a plethora of connection options, ranging from simple GPIO, through ...
Look for line similar tousb 2-2.1: New USB device found, idVendor=0d28, idProduct=0204 You can also install from source by cloning the git repository and running python setup.py install Standalone GDB Server When you install pyOCD via pip, you should be able to execute the following in...
especially with connecting to a running device, or if the program on the device is somehow not working ‘normally’. Using solely OpenOCD with CMSIS-DAP is not something I recommend: better to have Segger J-Link and/or P&E Universal Multilink at hand, because both of them were able to ...