sudo vim /etc/udev/rules.d/99-cmsis-dap.rules SUBSYSTEM=="hidraw", ATTRS{idVendor}=="28e9", ATTRS{idProduct}=="058f", MODE="0666" xendless@ubuntu22:~/ohos/openharmony-4.1-release$ lsusbBus002Device001:ID1d6b:0002LinuxFoundation2.0root hubBus001Device008:ID28e9:058fGDMicroelectronicsCMS...
Error: unable to open CMSIS-DAP device 0x1fc9:0x5601 Error: unable to find a matching CMSIS-DAP device ** OpenOCD init failed ** shutdown command invoked *** [upload] Error 1 === [FAILED] Took 1.82 seconds === * 终端进程“platformio 'run', '--target...
/// may be used by the debugger or IDE to configure device parameters. #define TARGET_DEVICE_FIXED 0 ///< Target Device: 1 = known, 0 = unknown; #if TARGET_DEVICE_FIXED #define TARGET_DEVICE_VENDOR "ARM" ///< String indicating the Silicon Vendor #define TARGET_DEVICE_NAME "Cortex-M...
Open On-Chip Debugger > halt target state: halted target halted due to debug-request, current mode: Thread xPSR: 0x21000000 pc: 0x08000200 msp: 0x20000418 > flash write_image erase ./F103.hex auto erase enabled device id = 0x10036414 flash size = 512kbytes wrote 2048 bytes from file ...
Error: unable to open CMSIS-DAP device Error: unable to init CMSIS-DAP driver Error: Error selecting 'cmsis-dap' as transport Runtime Error: /home/fcamps/dev/kds/kinetis-design-studio_3.2.0-1_amd64/opt/Freescale/KDS_v3/eclipse/../openocd/bin/..//scripts/kinetis.cfg:3: in ...
You can install the package later usingpacman -S mingw-w64-x86_64-libusband then perform the configuration and build again. After the./configure --disable-werrorcommand, check that the CMSIS-DAP v2 Compliant Debugger is enabled. My output looks like this: ...
USB - Device - HID = 1 一个简便方法是先把 USB - Device - HID 设成 1,然后按照左下角的提示把依赖的项目选上就好。 新建好的工程有这些内容: 配置工程 设置HSE_VALUE 在Target 设置里面设置正确的晶振频率。 配置CMSIS-Driver 这一步配置 USB 相关的硬件初始化。
keil官⽹的介绍如下：CMSIS-DAP is the interface firmware for a Debug Unit that connects the Debug Port to USB. Debuggers, which execute on a host computer, connect via USB to the Debug Unit and to the Device that runs the application software. The Debug Unit connects via JTAG or SW to...
new usb device attached to usbvbus port 1 usbip err: usbip_windows.c: 457 (sock_read_async) incomplete header 1 997 usbip err: usbip_windows.c: 374 (write_to_dev) read from sock ret 19 not equal a usbip_header usbip err: usbip_windows.c: 374 (write_to_dev) read from ...
USB Device Class Definition for Human Interface Devices (HID):HID类的标准,主要用于实现CMSIS-DAP v1的免驱动安装。 Microsoft OS 2.0 Descriptors Specification:MS OS描述符标准,主要用于实现CMSIS-DAP v2的免驱动安装(通过WinUSB),这里我们使用的是2.0的标准,可以兼容Windows 8.1和10。 8051的指令集和单片机的...