AMS 2175 铸件、分类及其检验 AMS 2175 -5- 1 范围 1.1目的 此标准规定了金属铸件无损检测的检测方法、抽样频次和验收标准。 1.2应用性 该标准典型用于建筑铸件,但是其用途已经不仅仅限于此。 1.2.1铸造方法:本标准适用于除高压模铸外的所有铸造方法,关于高压模铸参考 8.3。 1.2.2铸造合金:本标准适用于表 6 ...
c.3类不包括在类别1与类别2在内的,且安全系数小于等于200%的一类铸件 d.4类不包括在类别1与类别2在内的,且安全系数大于200%的一类铸件 1.3.2级别(Grade):铸件或者铸件的截面应当是分为以下几个级别的: a.A级具有最高质量级别的铸件或者铸件的某些部位,其允许的不连续性最少,且很难生 ...
1.3.2级别(Grade):铸件或者铸件的截面应当是分为以下几个级别的: a.A级具有最高质量级别的铸件或者铸件的某些部位,其允许的不连续性最少,且很难生产,只能在特定的场所进行生产; b.B级铸件或铸件的某些部位质量要求次高,允许比A级稍多一点的缺陷,同样很难生产,只能在指定生产场所生产; c.C级铸件或铸件的某些...
Grade B - The second highest quality grade of casting, or area of a casting, which allows slightly more discontinuities than Grade A, and difficult to produce, except in local areas. Grade C - A high quality grade of casting, or area of a casting, that can be consistently ...
[5] AMS 2175 Grade A, Inch 1/8 1 None None None None None Discontinuity 3/8 1/8 3 1 None None Grade B, Inch 3/8 1/8 5 3 1 6 6 None Grade, C Inch 3/8 1/8 7 [1] 2 6 6 None Grade D, Inch 3/8 7 [2] 7 5 7 6 3 6 6 7 7 3/4 Copyright SAE International ...
中文标准名称:SAE AMS 5620G-2006 (SAE 51420F, 51420FSe)规定的13Cr(0.30-0.40C)耐腐蚀和耐热钢棒材、线材和锻件 英文标准名称:Steel, Corrosion and Heat Resistant, Bars, Wire,and Forgings 13Cr (0.30 - 0.40C) (SAE 51420F, 51420Se) Free-Machining Grade UNS S42020 (Type 2); S42023 (Type...
经营范围销售:模具钢材、金属材料、五金配件、汽车配件、锯条、不锈钢、铜材、铝材、硬质合金。 点击查看更多企业信息 店内其他产品 更多>> 原料辅料、初加工材料分类 有色金属及加工材 有机、无机化学原料 吸咐剂、干燥剂 燃料 石油制品 煤化工产品 橡胶、塑料、树脂 ...
3.7.1当满意标准没被指定时,应遵循AMS-STD-2175的Grade C。 3.7.2检验方法和频率应由买方和卖方协调一致。可选择AMS-STD-2175标准中的“Casting Class”制定检验方法和频率。 3.7.3铸件应在射线检验控制下生产。这种控制应对铸件进行100%的射线检验,直至确立操作控制要素(4.4.2),以保证生产出合格铸件。除非买方特...
methods shall be agreed upon by purchaser and vendor (See 8.2.8). MIL-STD-2175 may be used to specify acceptance standards (casting grade) and frequency of inspection (casting class). 3.7.4.1 When acceptance standards are not specified, Grade C of MIL-STD-2175 as applicable to steel ...
MIL-STD-2175 may be used to specify acceptance standards (casting grade) and frequency of inspection (casting class). When acceptance standards are not specified, Grade C of MIL-STD-2175 as applicable to steel castings shall apply for each applicable method of inspection. Castings shall not be...