SAE AMS-STD-2175A-2003 适用范围 目的:本军用标准的目的是规定按本标准分类(见1.3)的金属铸件检验的无损检测验收标准。 适用范围:铸造方法:本标准旨在适用于除高压压铸件之外的所有铸造方法(例如 ASTM B 85@“铝合金压铸件”涵盖的铸造方法)。 铸造合金:本标准适用于属于表 6 中涵盖的合金族之一的铸造合金不属...
withoutthepriorwrittenpermissionofSAE. TOPLACEADOCUMENTORDER:Tel:877-606-7323(insideUSAandCanada) Tel:724-776-4970(outsideUSA) Fax:724-776-0790 Email:custsvc@sae SAEWEBADDRESS:http://.sae AMS2175 ® IssuedJUL2003 SupersedingAMS-STD-2175 1.SCOPE: 1.1Purpose: Thisspecificationestablishes...
8.9 Cross Reference: The class of castings defined in 1.3 corresponds to previous designations of this specification as follows: AMS 2175 AMS-STD-2175 Class 1 Class 2 Class 3 Class 4 MIL-STD-2175 MIL-C-6021H Class 1 Class 2 Class 3 Class 4 MIL-C-6021G Class 1, Class 1A Class 1,...
AMS-STD-2175 铸件,分类和检查的范围ndti ;应该用来代替美军标MIL - STD - 2175a ,这是取消了对1999年11月10 .可与北京中普科标图书网+国际标准服务网+标准翻译中心联系。
表1 由美国军用标准转化的AMS清单序号AMS 标准号标准名称发布日期被代替标准号1 AMS9226 耐热不锈钢丝982℃稳定1998.11 MS9226 2 AMS10133A 挤压等臂角材1998.12 AND10133 3 AMS10134A 挤压不等臂角材1998.12 AND10134 4 AMS10135A 挤压圆截面角材1998.12 AND10135 5 AMS10136A 挤压T型材1998.12 AND10136...
国际标准分类中,ams-std-2175涉及到。在中国标准分类中,ams-std-2175涉及到。SCC,关于ams-std-2175的标准MIL MIL-STD-2175A-1993 铸件、分类和检验(取代 MIL-STD-2175)(S/S BY SAE-AMS-STD-2175) SAE - SAE International,关于ams-std-2175的标准...
AMSSTD2175A July 14, 2003 Castings, Classification and Inspection of The purpose of this military standard is to prescribe the non-destructive testing acceptance criteria for the inspection of metal castings that are classified (see 1.3 ) in accordance with this......
AMS标准清单 由美国军用标准转化的宇航材料规范（AMS）清 单 自美国1994年6月发布关于美军标改革的政策备忘录以来，在军用材料及热工艺方面，截止1999年1月，由美国军用标准转化而来的宇航材料规范（AMS）有151项，转化方式是将原标准代号用AMS代替，即将MS、AND、FED、MIL等改为AMS，原标准代号不变。转化而来的AMS...
MIL-STD-2175 may be used to specify acceptance standards (casting grade) and frequency of inspection (casting class). 3.7.4.1 When acceptance standards are not specified, Grade C of MIL-STD-2175 as applicable to steel castings shall apply for each applicable method of inspection. 3.7.5 ...
A “Casting Class” of MIL-STD-2175 may be selected to specify the method and frequency of inspection. 3.7.3 Castings shall be produced under radiographic control. This control shall consist of 100% radiographic inspection of castings until process control factors (4.4.2) have been established ...