Stand-alone views for the8202-E4Cor8205-E6D Figure 4. Stand-alone front view Figure 5. Stand-alone side view Figure 6. Stand-alone rear view Memory card locations Figure 7. Memory card locations PCIe SAS RAID and SSD adapter locations ...
The location code label for the worldwide unique identifier consists of the prefix W followed by a maximum of 16 uppercase hexadecimal digits with no leading zeros. A location code might not consist of a worldwide unique identifier. When present, the worldwide unique identifier location label fo...
Place the system into the service position.For instructions, seePlacing the rack-mounted8202-E4B,8202-E4C,8202-E4D,8205-E6B,8205-E6C, or8205-E6Dsystem into the service position. Remove the service access cover. For a rack-mounted system, seeRemoving the service access cover from a rack-moun...
Figure 1. Replacing the fan in a rack-mounted model for8202-E4B,8202-E4C,8202-E4D,8205-E6B,8205-E6C, or8205-E6D
Attention:If you are servicing a failing part, see the service procedures forRemoving and replacing the 8202-E4B, 8202-E4C, 8202-E4D, 8205-E6B, 8205-E6C, or 8205-E6D Slimline media device with the system power on in IBM i. The following procedure is intended for installing a new or up...
If you need additional information for failing part numbers, location codes, or removal and replacement procedures, seePart locations and location codes. Select your machine type and model number to find additional location codes, part numbers, or replacement procedures for your system. ...
Exit Status This command has a return code of 0 on success. Security This command is accessible by all users. Examples To list the current reference code for the managed system, type: lsrefcode -r sys To list the current reference code for all partitions, type: ...
System backplane, location: Un-P1 Power supplies, locations: Un-E1 and Un-E2. Plug in the power cords and wait for 01 in the upper-left corner of the control panel display. Turn on the power using the white button. Does the system reach an operati...
For instructions, see Installing memory risers for the 8202-E4B, 8202-E4C, 8202-E4D, 8205-E6B, 8205-E6C, or 8205-E6D.Replace all the voltage regulator modules. For instructions, see Replacing the 8202-E4B or 8205-E6B processor voltage regulator module or Replacing the 8202-E4C, 8202-E4D...
If you removed the backplane as a part of another procedure, continue with that procedure. To replace the backplane or to install a new backplane, see Replacing the 8202-E4B, 8202-E4C, 8202-E4D, 8205-E6B, 8205-E6C, or 8205-E6D disk drive backplane.Parent...