(V–) = 12 V, VCM = VS / 2 at TA = 25°C (Unless otherwise noted) PARAMETER TEST CONDITIONS MIN TYP OUTPUT TPD-HL Propagation delay time, high- to-low VOD = 10 mV, CL = 50 pF 900 TPD-HL Propagation delay time, high- to-low VOD = 100 mV, CL = 50 pF 450 TPD-LH ...
25 CHG, DSG 0 16 V REGOUT, ALERT VOUT Output voltage (CAP1–VSS) (CAP1–VSS), (CAP2–VC5x) BQ76920 BQ76930 0 3.6 V (CAP1–VSS), (CAP2–VC5x), (CAP3–VC10x) BQ76940 Cell balancing ICB current (internal, per cell) BQ76920 BQ76930, BQ76940 0 50 mA 0 5 mA RC External...
(dc differential driver) low speed mode Common mode, input range, differential receiver Input transition times, TTL/LVCMOS(1) Junction temperature range(3) 3 0 0 2 2 0 0 22 (–5%) 0.8 0 0 3.3 3.6 VCC VCC VCC 0.8 VCC 0.8 70 22 (+5%) 12 1.5 2.5 25 115 V V V V V V V °...
(4)) TA = 25°C, 10% to 50% RH TA = 25°C, 10% to 70% RH TA = 25°C, 10% to 80% RH TA = 25°C, 10% to 90% RH Low Power Mode 0 (lowest noise) ±0.5 ±1.0 ±1.0 ±1.5 ±0.02 ±2.0 ±2.0 %RH ±2.5 ±3.0 RHREP Repeatability Low Power Mode 1 Low Power Mode...
If the I2C bus is held idle for more than 25 ms, the bus times out. The I2C bus is bidirectional; that is, the SDA line is used for both transmitting and receiving data. When the master reads from a slave, the slave drives the data line; when the master sends to a slave, the ...
(2) (3) TA = 25°C TA = -10°C to 60°C TA = -40°C to 85°C TA = 25°C TA = -10°C to 60°C TA = -40°C to 85°C 1.210 1.212 ±10 ±10 1.214 V PPM/°C PPM/°C 1.23 1.24 1.25 V ±20 PPM/°C ±50 PPM/°C (1) V(REF1) is used for the ADC ...
STB = 0 V RL = 50 Ω, CL = open See 図 6-1 50 60 mA Recessive TXD = VCC, STB = 0 V RL = 50 Ω, CL = open See 図 6-1 7 8.2 mA Supply current normal mode Dominant with bus fault TXD = 0 V, STB = 0 V CANH = CANL = ±25 V RL = open, CL = open See 図...