You can wait weather the fuse24 driver from openwrt is supported by next build and use ntfs-3g through fuse24 on a 2.4 kernel. Long story short answer: Use FAT32 or no native write support for both windows and linux. Back to topkennnnnethDD-WRT NoviceJoined: 18 Feb 2010Posts: ...
安装步骤很简单,首先启用usb、jffs、等。 然后: mkdir -p /jffs/opt mount -o bind /jffs/opt /opt wget -O - http://pkg.entware.net/binaries/mipsel/installer/installer.sh | sh
家用也是相当稳定。我们不代刷的哦,成色8新,配带电源一个 型号:E3000 CPU:BCM4718 480MHz 内存:64M 闪存:8M USB2.0 300M无线 1000M网口 2.4g/5g双频同发 LINKSYS 思科 E3000 双频 支持DD-WRT,tomato ,OPENWRT 300M无线千兆有线路由, ` 附件: 您需要登录才可以下载或查看附件。没有帐号?注册 更多回帖 ...
If you want to squeeze a little bit of extra functionality out of your router, consider flashing an open-source firmware like dd-wrt, openWRT or LEDE. Flashing a custom ROM can greatly increase the stability and functionality of your old router. Following are the firmwares that we have ide...
actually a BCM4718 (the biggest one for now until the BCM4748 gets released). Jonas ___ openwrt-devel mailing list openwrt-devel@lists.openwrt.orghttps://lists.openwrt.org/mailman/listinfo/openwrt-devel
To get started with the flashing, head over to the OpenWrt instructions for WRT610N v1 and they'll take it from there. Note: Flashing custom firmwares is always on you're on own risk. Make sure to read OpenWrt's wikis to understand the risks and how to proceed if something goes ...