消息:信息:[Labtools 27-1434]器件xc7z020(JTAG器件索引= 1)的编程设计中没有支持的调试内核。警告:[Labtools 27-3123]用户扫描链1或3未检测到调试集线器核心 2016李勇 2019-10-16 09:34:16 DC2269A-A DC2269A-A评估板 电子发烧友网为你提供ADI(ti)DC2269A-A相关产品参数、数据手册,更有DC2269A-A的...
In hardware target properties, name is displayed as localhost:3121/xilinx_tcf/Digilent/210319AB51BBA and status is open. But Number of devices is displayed as 0. In message window the following error message is displayed: [Labtools 27-2269] No devices detected on target ...
软件vivado2019.1 刚打开zcu102的评估板，上电后，串口只打印出“Press ESC to enter System Ctrollar mode.”没有网上说的firmware版本信息。但是vivado连接不上板子，驱动重新安装过，还是连接不上，在vivado2019.1中显示的问题是 “ [Labtools 27-2269] No devices detected on target localhost:3121/xilinx_tcf...
错误信息:ERROR: [Labtools 27-2269] No devices detected on target localhost:3121/xilinx_tcf/Xilinx/Port_#0007.Hub_#0003. Check cable connectivity and that the target board is powered up then use the disconnect_hw_server and connect_hw_server to re-register this hardware target. ERROR: [Commo...
[Labtools 27-2269] No devices detected on target Check cable connectivity and that the target board is powered up then use the disconnect_hw_server and connect_hw_server to re-register this hardware target." When I shutdown the board, Vivado says " [Labtoolstcl 44-513] HW Target...
Hi, I recently got the Virtex-7 FPGA and trying to set it up to flash in the image provided by others. I fail to open the hardware. If I use the Auto Connect, I get the below error messages:- INFO: [Labtoolstcl 44-466] Openi
错误信息: ERROR: [Labtools 27-2269] No devices detected on target localhost:3121/xilinx_tcf/Digilent/210249856468. Check cable connectivity and that the target board is powered up then use the disconnect_... 查看原文 VIVADO和SDK的联合硬件调试 ...
Vivado连接不到miz702n开发板 ERROR: [Labtools 27-2269] 错误信息: ERROR: [Labtools 27-2269] No devices detected on target localhost:3121/xilinx_tcf/Digilent/210249856468. Check cable connectivity and that the target board is powered up then use the disconnect_... ...
错误信息：ERROR: [Labtools 27-2269] No devices detected on target localhost:3121/xilinx_tcf/Xilinx...