to control USB CDC on boot, but neither of those show up in my sdkconfig file, not even as "not set" comments. Also, turning on TinyUSB Stack in the menuconfig appears to set a different config, CONFIG_TINYUSB, so that seems to be the wrong option or wrong kind of TinyUSB?
在Arduino(1.8.18)开发中USB CDC On Boot选择 Enabled或Disabled的串口输出问题; //--- 选择Enabled时:原生USB可以看到串口号,也可以正常下载固定,但显示感觉ESP32C3速度下降了很多(如同一程度下,按键短按时间要久一点才能有动作) //--- 选择Disabled时:速度倒是正常,原生USB转串口又没有输出了,这样太不方便调...
ESP32C3的USB CDC ON BOOT一旦打开,虽然可以不通过串口芯片直接获取串口输出,但是程序的执行受到明显的影响,同样的一段每隔500ms闪一次灯同时串口输出一句话这样的简单程序,会随着时间变得误差越来越大(白色线接的为enable的),不知道有没有人了解这个问题怎么解决 L叶大冬的微博视频 小窗口 û...
Since there is no uclass for USB PHY. The device won't be setup for the USB PHY node in DTB. And its associated power domain device won't be turned on neither by DM framework. This patch modifies the ehci-mx6 driver to enable the power domain device before access the USB PHY. This...
在Arduino(1.8.18)开发中USB CDC On Boot选择 Enabled或Disabled的串口输出问题; //--- 选择Enabled时:原生USB可以看到串口号,也可以正常下载固定,但显示感觉ESP32C3速度下降了很多(如同一程度下,按键短按时间要久一点才能有动作) //--- 选择Disabled时:速度倒是正常,原生USB转串口又没有输出了,这样太不方便调...