合宙esp32c3 简约款 进行串口调试很简单,只需要在platformio.ini中配置两行代码即可: build_flags = -D ARDUINO_USB_MODE=1 -D ARDUINO_USB_CDC_ON_BOOT=1 这样就可以愉快的调试了 注意大小写,完全复制到配置文件中,小写是没有用的
Platformio ESP32S3等使用arduino时通过原生USB打印ESP_LOG 在arduino里面使用ESP_LOGx这类打印log时,如果想重定向到原生usb的串口上的话只要在platformio.ini里面加这两个(需要先打开原生USB的串口) build_flags = -D ARDUINO_USB_CDC_ON_BOOT=1 -D ARDUINO_USB_MODE=0 恩,编译的时候可能会有warning说ARDUINO_...
build_flags = -D ARDUINO_USB_MODE=1 -D ARDUINO_USB_CDC_ON_BOOT=1 亮屏程序 这里注意第六行代码: GxEPD2_290_T5D这个是屏幕的驱动程序,不同屏幕对应的驱动是不一样的,不要选择错误。 屏幕的驱动到屏幕的生产厂商处可以找到,屏幕驱动对应代码关系到库的 github 上找,或者看源码。 https://github.com/...
board_build.flash_size = 4MB board_build.f_flash = 80000000L board_build.flash_mode = dio board_build.filesystem = littlefs extra_scripts = ./extra_script.py monitor_filters = esp32_exception_decoder build_flags = -D ARDUINO_USB_MODE=1 -D ARDUINO_USB_CDC_ON_BOOT=1 -D...
build_flags = -DCORE_DEBUG_LEVEL=3 -DARDUINO_USB_MODE -DARDUINO_USB_CDC_ON_BOOT=1 It builds, but Serial.println does not result in any text coming back over the connection (yes, I did Serial.begin()). Strangely (or perhaps not, I'll leave that up to you) a straight printf or...
[env:esp32-s3-fh4r2] platform = espressif32 @ 6.6.0 board = esp32-s3-fh4r2 framework = arduino lib_deps = bodmer/TFT_eSPI@^2.5.43 board_upload.flash_size = 4MB board_build.flash_mode = qio build_flags = -DCORE_DEBUG_LEVEL=5 -DARDUINO_USB_CDC_ON_BOOT=1 -DBOARD_HAS_PSRAM...
Control WS2812B and many more types of digital RGB LEDs with an ESP8266 or ESP32 over WiFi! - WLED/platformio.ini at main · wled-dev/WLED
在arduino里面使用ESP_LOGx这类打印log时,如果想重定向到原生usb的串口上的话只要在platformio.ini里面加这两个(需要先打开原生USB的串口) build_flags = -D ARDUINO_USB_CDC_ON_BOOT=1 -D ARDUINO_USB_MODE=0 恩,编译的时候可能会有warning说ARDUINO_USB_MODE重复定义了,加上这句就行了 ...
using the https://github.com/Xinyuan-LilyGO/T7-S3/blob/main/platformio/boards/lilygo-t7-s3.json board file with the following addition to the “extra-flags” section seems to solve this isue“-DARDUINO_USB_CDC_ON_BOOT=1” to the ex 0 Please...
with the usb example program in the platformio-ch32-arduino framework, and also directly using the latest tinyusb library. It just does nothing, never detected as a device, never believes it has seen a host. I want to implement a keyboard device, but I can’t even get CDC serial to ...