From your log, I can see that the board is trying to boot Ubuntu from the network and, so there, the system is unable to find the "dtb" file for that, so I recommend you change the boot way and select the MMC. Also, this could probably be happing due to a conflict on the ...
HelloI am trying to boot 4EV , Petalinux 2018.3 , boot starts at QSPI ( FSBL,PMU,BL31) and u-boot that hand off boot to SD-0.I keep getting ** Unable to read file system.dtb **built sd:
I was super excited to see this awesome hack (thank you for all the notes, they are awesome!) and found a promising stick that I purchased from alibaba; the primary chip checks out – MSM8916 and going by the markings on the hynix chip ne...
Mate, did find a way to install armbian in this box I have one also and it can't boot from usb. I still have not found the way too. It seems we need to extract the DTB file from Android but I have not done it yet. Copy link relil commented Jan 26, 2024 dts from android f...
ERROR: Unable to find the kernel source tree for the currently running kernel...Please make sure you have installed the kernel source files for your kernel and...
-rwxrwx--- 1 root disk 61394 Nov 6 2023 imx8dxl-evk.dtb However, imx8dxl-orangebox failed to boot from SD/MMC1: imx8dxl-orangebox login:U-Boot SPL 2022.04-lf_v2022.04_imx8dxl_orangebox+g598f0baef7 (Oct 19 2022 - 16:31:17 +0000)Normal BootTrying to boot from MM...
[ 294.868842] create_overlay: Failed to create overlay (err=-22)<CR> [ 294.896059] OF: overlay: remove: Could not find overlay #0<CR> kr260-mv-camera-color: load Error: -1<CR> ubuntu@kria:~$ sudo xmutil loadapp kv260-defect-detect OF: resolver: node label 'si5332...
[0003.730] shim_eeprom_update_mac:267: Failed to update 1 MAC address in DTB [0003.738] updating /chosen/nvidia,ethernet-mac node 48:b0:2d:c1:46:53 [0003.745] Plugin Manager: Parse ODM data 0x000a4000 [0003.757] shim_cmdline_install: /chosen/bootargs: earlycon=uart8250,mmio32,0x70006000...
ERROR: linux-toradex-5.4.91+gitAUTOINC+c59b3c2da1-r0 do_fetch: Fetcher failure: Unable to find file file://preempt-rt.scc anywhere. The paths that were searched were: The preemt-rt.scc exists in these folders. When I remove my layer from the bblayers.conf I can build...
Unfortunately, I don’t think I have any way to find out what version is running on the server unless you know some secret mojo. Lenon Kitchens @lenonk · 4 years ago Author In your original post, you used --csd-wrapper hipreport.sh, but in the latest example you didn't (new VM...