Universal Asynchronous Receiver and Transmitter(UART) device is widely used to carry out communications with peripheral device applied in industry control computers. Meanwhile, Windows operating system is widely used because of its friendly Use Interface(UI). This article introduces the working principle ...
JTAG instructions such as BYPASS, IDCODE, SAMPLE/PRELOAD and EXTEST will be usued to test the JTAG device(s) in STM32F103C8T6. Moreover, a command-line interface (CLI) was setup using Tera Term and UART in the microcontroller to ease the testing. Table of Contents JTAG Boundary Scan ...
In this work, a Logical synthesis of FPGA-based UART using a hyper terminal has been implemented. To enable real-time communication and user interaction UART with PISO baud rate generator, and FSM are integrated. It has been observed that the UART transceiver prints the ASCII value of the pre...
Mobile device of supporting uart and usb communication using same connector and operating method there-of A portable terminal and an operation method for supporting a UART(Universal Asynchronous Receiver Transmitter) and a USB(Universal Serial Interface) communications to single connector by automatically ...
each signal in a pile of default of the UART interface and UART interfaces through the CDMA mode when the CPLD is provided on the IrDA interface and UART interface control system of a mobile communication terminal for dual mode that can reduce the load (load) generated in the UART interface...