The 8088 processor used the same internal core as the 8086, had the same 16-bit registers, and could address the same 1MB of memory, but the external data bus was reduced to 8 bits. This enabled support chips from the older 8-bit 8085 to be used, and far less expensive boards and ...
It is a 16 bit special function register in the 8085microprocessor. It keeps track of the thenext memory addressof the instruction that is to be executed once the execution of the current instruction is completed.In other words, it holds the address of the memory locati...
The construction of memristor is shown below. It is a two terminal component and thememristor workingis, its resistance mainly lies on the magnitude, applied voltage, and polarity. As the voltage is not applied, then the resistance leftover, and this makes this as a non-linear and memory co...
Generally, the peripheral devices or the device controllers make use of the maskable interrupts. However, the non-maskable interrupts are used for handling events such as power failure, unrecoverable memory errors etc. In the 8085 microprocessor, all the hardware interrupts excluding the TRAP are mas...