The connected emulator is a jlink clone造成这种问题在于新的jlinkcommander版本会对jlinkflash固件中的某个地址上的二进制代码做错误校验然后报错只要修改那个地址上的代码就行 jlink提示 the connected emulator is a J-Link clone 解决办法 在win7 X64环境下安装了J-Link commander 用于mini2440开发板uboot的烧写...
Connect the board to your PC using a Micro-USB cable through the debug USB connector. Open a terminal program and select theJLink CDC UART COMport. Configure the terminal with a baud rate of 115200, data bits of 8, stop bit of 1, and with parity and flow control set to none. ...
kei MDK 更新至 4.6的版本后。烧录程序时Jlink驱动也更新了下，提示是clone。。。然后keil在点击flash...