jlink固件山寨盗版检查,the connected probe appears tobe a j-link clone问题 但是过了几天,这次拿了一个盗版jlink与电脑连上使用,却发现又会弹出奇怪的报错,说是“the connected probe appears tobe a j-link clone”,如图: 这次的报错,意思是说认为所连接的jlink固件内容是“克隆”的,也就是盗版检查!!! 这...
v8_fw.bin SAM-BA v2.18 for Windows JLink_Windows_V646k 说明手册 本资源主要解决JLINK V8 在keil v5中不能使用的问题,使用官方驱动后报各种错误,如果你在使用中遇到如下3种报错: 1、The connected J-Link is clone... 2、the connected j-link is defective... 3、the connected probe appears... 此...
BTW, find another USB cable, one connect to the debugger interface, another connect to the USB interface. J1 connect 5-6. Then try it again. 2) Can you explain what can be possible root causes that cause this? I literally unboxed the EVK, connected it, and bricked...
1) I started JLinkGDBServerCLExe on my host and connected to the target board correctly via SWD interface. 2) I started JLinkClient on my host and saw it connected to JLinkGDBServer correctly as my above screen shot. 3) started my demo app using gdb: $ arm-no...
The J-Link PC software automatically detects which implementation level is supported for the connected CPU-core. If intelligence in the firmware is available, it is used. If you are using a J-Link that does not have intelligence in the firmware and only PC-side intelligence is available for ...
BTW, find another USB cable, one connect to the debugger interface, another connect to the USB interface. J1 connect 5-6. Then try it again. 2) Can you explain what can be possible root causes that cause this? I literally unboxed the EVK, connected ...
Try the SPT tool on your side. BTW, find another USB cable, one connect to the debugger interface, another connect to the USB interface. J1 connect 5-6. Then try it again. 2) Can you explain what can be possible root causes that cause this? I literally unboxed the EVK, ...
I am trying the RT1170-EVK with SDK 2.11.1 with Ubuntu PC. I am using the on-board debug probe with JLink firmware. I can use JLinkGDBServer command line tool and gdb to debug the sample apps in step-by-step mode. Now I am wondering how to see the printf() or ...
I am trying the RT1170-EVK with SDK 2.11.1 with Ubuntu PC. I am using the on-board debug probe with JLink firmware. I can use JLinkGDBServer command line tool and gdb to debug the sample apps in step-by-step mode. Now I am wondering how to see the printf() or SEGGET_RTT_pri...