The MYC-YT113X is a low-cost embedded ARM SoM based on Allwinner T113-S3 processor which features up to 1.2GHz Dual-core ARM Cortex-A7 MPU.
Re: T113同时启用RISC-V和A7双核的尝试 audiomonster 说: 你们有HIFI4-DSP User Manual 和 Compiler ? 看来这个DSP好厉害 ! Local hobbyists make windows - hosted xtensa gcc. Under tests with t113-s3. xtensa-hifi4-elf-gcc.exe (crosstool-NG 1.25.0) 10.3.0 Copyright (C) 2020 Free Software Fo...
T113-i_User_Manual_V1.4.pdf 参考链接:全志A20 / A64 / A133 / D1 / T113-I/V83x /V85x Tina / Android 文档合集/集合,很全! 离线 #14 2024-03-10 20:37:53 分享评论 vigour1000 会员 注册时间: 2018-11-19 已发帖子: 101 积分: 2 Re: 自制T113-I 核心板一次成功开机 牛,开源吗?
manual for more information. endif config BR2_ENABLE_DEBUG bool "build packages with debugging symbols" help Build packages with debugging symbols enabled. All libraries and binaries in the 'staging' directory will have debugging symbols, which allows remote debugging even if libraries and ...
MPEG-1/2/4, JPEG, etc. The independent encoder can encode in JPEG or MJPEG. Integrated multi ADCs/DACs and I2S/PCM/DMIC/OWA audio interfaces can work seamlessly with the CPU to accelerate multimedia algorithms and improve the user experience. T113-i supports RGB/LVDS/MIPI DSI/CVBS OUT dis...
打开awboot目录下的board.c文件,根据硬件进行配置,串口对应基地址和外设复用号可以查看本文档附录,也可以查看《T113-S3_User_Manual_V1.6.pdf》中的“GPIO Multiplex Function”章节。 sunxi_usart_t usart5_dbg = { .base = 0x02501400, .id = 5, .gpio_tx = {GPIO_PIN(PORTB, 4), GPIO_PERIPH_MUX...
芯片内部集成掉电复位功能,通过检测 VCC-IO 电压触发复位,可软件使能掉电复位功能和配置 门槛电压,详见芯片 user manual 描述. 为保证掉电后及时拉低复位,下电时序要求 VCC-IO 掉电不得晚于其他供电,以保证在其他供电 未掉下前及时拉住复位,使芯片进入复位状态,各 IO 进入复位状态防止掉电过程误翻转...
1.2 适用范围 表 1-1: 适用产品列表 产品名称 内核版本 QT 版本 T113-S3 Linux-5.4 5.12.5 T113-i Linux-5.4 5.12.5 说明 本文档涉及到硬件部分的描述, 如未特别说明, 均基于 "T113_EVB_V1_0". AllWinner T113-S3 EVB 开发板, 板上丝印 说明 本文档涉及到 dts, defconfig 等配置文件路径的,对于...
> And according to the User Manual T113 does need a module clock and it has > to be started after the data clock. Otherwise that Manual is horrible and > thin in DSI. > As far as i understand page 57 dsi module clock can be hosc, peripll1x, > video0pll2x, video1pll2x, audio...
And according to the User Manual T113 does need a module clock and it has to be started after the data clock. Otherwise that Manual is horrible and thin in DSI. As far as i understand page 57 dsi module clock can be hosc, peripll1x, ...