16:30:54 : Error: Database cannot be found. DatabasePath = /Applications/STMicroelectronics/STM32CubeProgrammer/STM32CubeProgrammer.app/Contents/MacOs/bin/../Data_Base/STM32_Prog_DB_0xAAA.xml16:30:54 : Error: flash loader cannot be loaded. FlashLoaderPath = /Applications/STMicroelectronics/S...
This will download all the required data sources intosources/. Runcargo run --release --bin stm32-data-gen This generates all the intermediate JSON's inbuild/data/. Assignments of registers to peripherals is done in aperimapand fixes to registers can be done in the files located indata/reg...
INFO: Cannot find st,stpmic1 node in DT NOTICE: SP_MIN: v2.2-r1.0(debug):21665c8 ...
/DeviceDatabase 即可看pack是否导入成功。 四、兼容Keil4在用MDK5打开MDK4版本的项目工程的时候,通常会跳出一个窗口UsinganMDKVersion4Project: 图片的大致意思是,MDK4的工程迁移到MDK5时可选择两件事情中的其中之一解决: 1.迁移设备开发包 2.安装后续支持 我看其他人写的第一项总是出错就直接采用第二项了— ...
Flashing or updating the firmware on the STM32 MCU can be done in two ways, by using a SWD programmer or directly via USB. There is a bug in the new ST Programmer software version 2.17 throwing the error: "Error: Database: There's no active configuration for this device. All the 3 ...
Command'repo'not found, but can be installed with: sudo snap install git-repo 按照提示安装git-repo后重新执行命令,报错如下: $ repo init -u https://github.com/STMicroelectronics/oe-manifest.git -b refs/tags/openstlinux-5.4-dunfell-mp1-21-12-22 ...
在下载stm32程序的时候出现cannot enter debug model 以及下图情况 原因:JLINK和STM32的JTAG速率不同导致的解决方案: 打开配置JLINK/STLINK界面2.点击Auto clk按键。 ST用Keil下载程序问题错集锦! 一. keil+jlink环境下,stm32在SW模式下调试时,如果在download程序时报错nocortex-mswdevicefound,需要排查三个问题: 1...
Clock tree configuration conflicts can be solved by using the solver feature. When no exact match is found for a given user configuration, STM32CubeMX proposes the closest solution. • Automatic updates of STM32CubeMX and STM32Cube MCU packages STM32CubeMX comes with an updater mechanism ...
The magic setting was the CubeMX Database version. My faulty version was "MxDb.Version=DB.4.0.270". My correct version was "MxDb.Version=DB.5.0.10". I don't think users should be required to change low level files to configure critical settings like this. If it exists throug...
[STM32CubeProg] The connection error popup cannot be closed using the [X] close button. [STM32L4][DBANK] Wrong sector size when DBANK is disabled. [DATABASE][OB] Missing nDBOOT OB for 1‑Mbit targets. [Device_ID = 0x467][DATABASE] Remove testing on dual bank for the 128‑Kbit...