这个问题的核心错误是“Program file does not exist”（程序文件不存在）。在 STM32 开发中，出现这个...
这个问题的核心错误是“Program file does not exist”(程序文件不存在)。在 STM32 开发中,出现这个问题的原因可能是多方面的。 以下是该问题的详细分析和解决思路: 1 编译未成功 可能原因:代码有错误,导致编译未生成可执行文件。这可以从下方控制台看到 Build Finished. 0 errors, 0 warnings。看起来编译成功,但...
在STM32的开发过程中,开发者可能会遇到各种编译错误,其中“Program file does not exist”是一个较为常见且可能由多种原因引起的错误。这个错误通常意味着编译器在预期的路径下没有找到可执行文件(如.elf文件),这可能是由于代码错误、配置不当、文件损坏或权限问题等导致的。本文将深入探讨这一错误的潜在原因,并提...
PC：Program Counter，通用寄存器，控制程序执行，用来指向当前运行指令的下一条指令。 SP：Stack Pointer...
The STM32Cube ecosystem is a complete software solution for STM32 microcontrollers and microprocessors. It is intended both for users looking for a complete and free development environment for STM32, as well as for users who already have an IDE, including Keil or iAR, in which they can easil...
stm32CUBEMX生成代码路径必须是英文的吗,1、准备单片机STM32F103Zet6flashSPI协议W25Q32接线:SPI1PA567PA4-CS2、效果单片机可以使用fatfs文件系统访问片外flash3、单片机配置3、1SYSSWD仿真3.2RCC由于我这里有RTC时钟,所以两个时钟都接了3.3SPI这里我没有用cubeMX配出来
It does not configure the system clock at startup (contrary to the standard library). This is to be done using system_stm32f1xx.c the HAL APIs in the user files. It allows to : relocate the vector table in internal SRAM. Toolchain specific file that contains reset handler and ...
I'm not sure what could be the issue. The D-Cache is not configured in scatter file. It is either enabled at the startup (usually in main function), or disabled by default. Also I would recommend starting with some example based on HAL library or CubeMX generated code. E.g. I don...
error: cube firmware cannot be installed into repository. a file or directory with name same already exist. The cause of this error = old time add
I am trying to get an external timer (TIM5) to toggle an LED at a certain time period. I am designing it to interrupt every 2 micro seconds. I use an oscilloscope to check whether it works as intended, but unfortunately it does not. The clock speed is 45Mhz And I calculate the per...