关于YII2框架-jQuery(…).activeform is not a function in 解决方法 在使用YII2框架过程中遇到过控制台报出一个JS错误,jQuery(…).activeform is not a function,查看源代码看到这里。 确定一下yii框架这个文件有没有加载 没有的话,那么问题原因就找到了。 解决方案有很多种。 而我这里采用的是 加上一个 然...
新建目标配置文件时测试连接是没问题的,但之后不管是运行demo还是连接内部的core都提示“device is held in reset”,我现在的启动模式是MMC,在连JTAG的时候已经拔掉SD卡了,也就是linux系统不会运行,出现这样的提示不知道是什么问题? wanglinhua2627 2018-06-20 02:17:07 STM32烧录出现The core is locked up...
硬件复位与软件复位介绍 1. 硬件复位硬件复位如下图,直接将RESET引脚拉低即可,如下:2. 软件复位软件复位函数:NVIC_SystemReset();STM32F1XX系列中,复位函数在core_cm3.h文件中 china 2022-01-17 07:07:09 STM32失能时钟和复位外设的区别 STM32失能时钟和复位外设的区别 2023-10-17 11:48:30 深度剖析...
Debug方面的设置,在System Core分类下外设SYS中的debug选项设置为`Serial Wire`,即ST-LINK通信方式 打开串口USART2粗略地查看调试信息,可采用阻塞发送 设置外设TIM2 `Mode`中下`Clock Source`选择`Internal Clock` 从模式设置为`Reset Mode`,触发器源设置为`TI1FP1` 主频为8MHz,如果PSC设置为8000-1,则计数频率...
core_cm3.c/.h –>内核寄存器描述stm32f10x_conf.h –>库函数配置Library:STM32F10x_StdPeriph_Lib_V3.5.0\STM32F10x_StdPeriph_Lib_V3.5.0\Libraries\STM32F10x_StdPeriph_Driver\inc STM32F10x_StdPeriph_Lib_V3.5.0\STM32F10x_StdPeriph_Lib_V3.5.0\Libraries\STM32F10x_StdPeriph_Driver\src...
Core Arm® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accele...
In this case, we will try the“Blink”example. From the“select code”bar, apply“Sample sketch”and then choose“Examples > 01.Basics > Blink”and“Finish”. Note As the GCC ARM Toolchain is provided by the STM32 core, you do not have to download it in order to program your board....
关于STM32F4系列出现 #error directive: 关于STM32F4系列出现 #error directive: "Please select first the target STM32F4xx device used in your application (in stm32f4xx.h file)"的解决办法: 添加: USE_STDPERIPH_DRIVER,STM32F429_439xx 1.
This applies to all STM32H7 devices with dual-core feature.Other possibility is that the option bytes are configured in a way, that only Cortex-M4 boots after reset (BOOT_CM7/BCM7=0, BOOT_CM4/BCM4=1). Then you need to connect the debugger to Access port 3 (Cortex-M4), instead of...
The order of things pretty much matches, at the point it stops this is what is started on my board. [ 0.513823] arm-scmi firmware:scmi: Enabled polling mode TX channel - prot_id:16 [ 0.514131] arm-scmi firmware:scmi: SCMI Notifications - Core Enabled. [ 0.514257] arm...