它来自切片器,以及我们之前设置的自定义启动 G 代码(我们在两个示例的导出 gcode 中都看到了 PRINT_START 之后的参数名称)。 然而,在我们实际使用这些变量之前,我们必须从传递给 PRINT_START 宏的参数中提取它们。这些参数保存在 klipper 维护的集合中,称为 。请注意,在新宏的开头,我们看到了另一个新符号,也是大...
I'm using Klipper firmware and I want to set the pressure advance based on the nozzle diameter. Is that something I can do in Cura? Basically what I need is a case statement, or if-then-else. The gcode I need to add is: SET_PRESSURE_ADVANCE ADVANCE=n.nnn For a 0.4mm nozzl...
38 changes: 20 additions & 18 deletions 38 macros/start_print.cfg Original file line numberDiff line numberDiff line change @@ -177,6 +177,8 @@ gcode: { action_respond_info("Prime Line x_origin : %f" % (x_origin)) } { action_respond_info("Prime Line y_origin : %f" % (y_...
Running Cura 5.6.0 on a mac. With Lastest Mainsail running klipper on a Creality Ender 3 v2 Neo. This is my Start G-code: G92 E0 ; Reset extruder M117 Pre-heating the extruder! M104 S{material_print_temperature_layer_0}; Set extruder temp M140 S{material
{% set km = printer["gcode_macro _km_globals"] %} {% set bed_overshoot = (BED + (km.start_bed_heat_overshoot if BED else 0.0), printer.configfile.settings.heater_bed.max_temp ) | min %}INIT_LAYER_GCODE LAYERS="{LAYERS}" ...
The bed is small enough and thick enough that a mesh or other types of per print leveling should not be needed. There is a macro in Klipper to help with the manual bed leveling process: BED_SCREWS_ADJUST This tool will move the printer’s nozzle to each screw XY location and then ...
Usage: PRINT_END gcode: M400 G92 E0 G1 E-5.0 F3600 {% set km = printer["gcode_macro _km_globals"] %} {% set toolhead = printer.toolhead %} {% set max_x = toolhead.axis_maximum.x %} {% set max_y = toolhead.axis_maximum.y %} {% set max_x = km.print_max[0] %}...
I have this problem as well, I am using klipper and my start gcode looks like this: PRINT_START EXTRUDER_TEMP=[first_layer_temperature] BED_TEMP=[first_layer_bed_temperature] it sets all the temps i need in a macro on klipper Let us decide what gcode gets included, please... 👍 3...
File "/home/mks/klipper/klippy/gcode.py", line 200, in _process_commands self._respond_error(str(e)) UnicodeEncodeError: 'ascii' codec can't encode character u'\xe9' in position 51: ordinal not in range(128) Exiting SD card print (position 361) ...
大括号内有一个变量,但这个变量从何而来?我很高兴你问!它来自切片器,以及我们之前设置的自定义启动 G 代码(我们在两个示例的导出 gcode 中都看到了 PRINT_START 之后的参数名称)。 然而,在我们实际使用这些变量之前,我们必须从传递给 PRINT_START 宏的参数中提取它们。这些参数保存在 klipper 维护的集合中,称为...