<HUAWEI> display stack configuration * : Invalid-configuration # : Unsaved configuration ---Configuration on slot 2 Begin--- stack enable stack slot 0 renumber 2 stack slot 2 priority 150 stack reserved-vlan 4093 stack timer mac-address switch-delay 10 interface stack-port 2/1 *port interface...
<HUAWEI> display stack configuration * : Invalid-configuration # : Unsaved configuration ---Configuration on slot 2 Begin--- stack enable stack slot 0 renumber 2 stack slot 2 priority 150 stack reserved-vlan 4093 stack timer mac-address switch-delay 10 interface stack-port 2/1 *port interface...
MAC Address: 000f-e20f-3135 Member status:Up IP: 129.10.1.17/16 # 切换到从交换机Switch B上进行配置。 <stack_0.Sysname> stacking 1 <stack_1.Sysname> # 在从交换机Switch B上显示堆叠信息。 <stack_1.Sysname> display stacking Slave device for stack. Member number:1 Management-vlan:1(defaul...
Switch Stack Bridge ID A switch stack is identified in the network by itsbridge ID, which is determined by the MAC address of the stack master. If the stack master changes, the MAC address of the new active switch determines the new bridge ID. ...
[HUAWEI]display system mac-address Current System MAC address: 8446-fea1-dd20(Used Stack MAC) Current System MAC number : 16 User-configured MAC address: -- User-configured MAC number : -- System MAC Switch : Enable System MAC Switch-delay: 10(minutes) System MAC Inconsistence-alarm : Ena...
[HUAWEI]display system mac-address Current System MAC address: 8446-fea1-dd20(Used Stack MAC) Current System MAC number : 16 User-configured MAC address: -- User-configured MAC number : -- System MAC Switch : Enable System MAC Switch-delay: 10(minutes) System MAC Inconsistence-alarm : Ena...
[aaa_0.H3C-cluster] add-member 17 mac-address 000f-e20f-0012 # 配置成员设备信息的保留时间为100秒。 [aaa_0.H3C-cluster] holdtime 100 # 配置握手报文定时发送的时间间隔为10秒。 [aaa_0.H3C-cluster] timer 10 # 配置集群内部公用的FTP Server、TFTP Server、Logging host及SNMP host。 [aaa_0....
nsr process-failures switchover no nsr process-failures switchover Syntax Description This command has no keywords or arguments. Command Default If not configured, a process failure of the active TCP or its applications (for example LDP, BGP, and so forth) can cause sessions...
2015-10-30, V3.4.0 General Changed all applications in order to have preprocessing definitions on top of the files and added relevant comments Applications LED control is no more done into the timer callback functions but instead on the main while loop. ...
switch hubHow does a router works? A router is a physical or virtual appliance that passes information between two or more packet-switched computer networks. A router inspects a given data packet's destination Internet Protocol address (IP address), calculates the best way for it to reach its...