stack timer mac-address switch-delay upgrade backup-area slot upgrade start Command Support Table 3-50 Applicable product models and versions Product Software Version Stack Connection Mode Product Model S300 V200R020C10, V200R021C00, V200R021C01, V200R021C10, V200R022C00, V200R022C10 Servic...
stack timer mac-address switch-delay upgrade backup-area slot upgrade start Command Support Table 3-50 Applicable product models and versions Product Software Version Stack Connection Mode Product Model S300 V200R020C10, V200R021C00, V200R021C01, V200R021C10, V200R022C00, V200R022C10 Servic...
MAC Address: 000f-e20f-3135 Member status:Up IP: 129.10.1.17/16 # 切换到从交换机Switch B上进行配置。 <stack_0.Sysname> stacking 1 <stack_1.Sysname> # 在从交换机Switch B上显示堆叠信息。 <stack_1.Sysname> display stacking Slave device for stack. Member number:1 Management-vlan:1(defaul...
MAC Address: 000f-e20f-3135 Member status:Up IP: 129.10.1.17/16 # 切换到从交换机Switch B上进行配置。 <stack_0.Sysname> stacking 1 <stack_1.Sysname> # 在从交换机Switch B上显示堆叠信息。 <stack_1.Sysname> display stac...
A switch stack is identified in the network by itsbridge ID, which is determined by the MAC address of the stack master. If the stack master changes, the MAC address of the new active switch determines the new bridge ID. If the entire switch st...
Run the display system mac-address command to check whether the system MAC address is the MAC address of the master device in the stack according to the Stack MAC Information field in the command output. If the Stack MAC Information field is displayed, the system MAC address is not the MAC...
Run the display system mac-address command to check whether the system MAC address is the MAC address of the master device in the stack according to the Stack MAC Information field in the command output. If the Stack MAC Information field is displayed, the system MAC address is not the MAC...
Solved a firmware freezing when one of the following situations arrived in OnRxDone callback: bad address, bad MIC, bad frame. (Pull request #10) Moved the MAC commands processing to the right places. FOpts field before the Payload and Port 0 just after the decryption. (Pull request #9...
To configure the local station MAC address for the router, use the hw-module local-station-mac command in the configuration mode. hw-module local-station-mac mac-address Syntax Description mac-address Specify the 12-digit local station MAC address for router. Command Default None C...
A MAC address is a unique identification number or code used to identify individual devices on the network. Packets that are sent on the ethernet are always coming from a MAC address and sent to a MAC address. If a network adapter is receiving a packet, it is comparing the packet’s dest...