By default, the stack MAC address will always be the MAC address of the first active switch, even if a new active switch takes over. The same behavior occurs when you enter thestack-mac persistent timercommand or thestack-mac persistent timer 0command....
Step 2stack-mac persistent timer[0|time-value] Example: Switch(config)#stack-mac persistent timer 7 Enables a time delay after a stack-master change before the stack MAC address changes to that of the new stack master. If the previous stack...
I haven't had to a chance to test this out and I won't for another couple of weeks but I suspect that it is because the LACP system ID is based on Stack Master MAC address. Has anyone tried this global command on the stack: stack-mac persistent timer 0 This will enable the st...
Now as you have issued the command the stack MAC address of the previous master will be used until you enter the no stack-mac persistent timer command, which changes the stack MAC address to that of the current master. If you do not enter this command, the stack MAC address does ...
void osalInitTasks( void ) { uint8_t taskID = 0; tasksEvents = (uint16 *)osal_mem_alloc( sizeof( uint16 ) * tasksCnt); osal_memset( tasksEvents, 0, (sizeof( uint16 ) * tasksCnt)); macTaskInit...
vi 70-persistent-net.rules 注释掉第一行, 将最后的eth1 改为eth0 mac 地址可以看生成的centos-6.9-03.xml 文件 1. 2. 3. 4. 5. 6. 删掉虚拟机网卡的MAC 地址 cd /etc/sysconfig/network-scirpt/ vi ifcfg-eth0 删掉mac 地址将虚拟机重启 ...
API MAC: (directory: components/api) Provides an interface to the management and data services of the TI-15.4-Stack protocol stack Collector: (file: example/collector/collector.c) Implements an example application that starts the network, allows new devices to join t...
Rev. 0.1 | 6 UG435.03: Architecture of the Silicon Labs Connect Stack v3.x Connect Stack Layers 4.2 MAC Layer The Connect MAC layer is based on RAIL's IEEE 802.15.4-specific API, which provides the interface to the hardware implementation for • Address filtering • ACK • CSMA/CA ...
Indirect mode(间接模式):通过 macvtap 来进行转接(具有虚拟 MAC 地址),支持 Hypervisor(Libvirt)层面的热迁移,但性能肯定有损失(20%-30%)。实现方式是:Nova 会先到目的节点上获取 VF 的 MAC 地址等信息,然后重新生成 XML 并在目的节点上启动。 direct mode(直接模式):即透传,不支持 Hypervisor(Libvirt)层面的...
* @sk_destruct: called at sock freeing time, i.e. when all refcnt == 0 * @sk_reuseport_cb: reuseport group container*//*struct sock是与具体传输层协议相关的套接字,所有内核的操作都基于这个套接字。 //传输控制块 struct socket里面的struct sock指向了这里 ...