TCP/IP protocols operate at a lower level than the application protocols. The TCP/IP suite of protocols includes TCP, User Datagram Protocol (UDP), and Internet Control Message Protocol (ICMP). Port: It's the network port that the system service listens on for incoming network traffic....
Source Subnet Mask Destination Subnet Mask Protocol Port * * 192.168.1.0 255.255.255.0 TCP 3389 192.168.1.0 * TCP 3389 * * 192.168.1.0 255.255.255.0 TCP 80 192.168.1.0 255.255.255.0 * * TCP 80 Internal Router Expand table Source Subnet Mask Destination Subnet Mask Protocol Port 192.168.1.0 ...
az network nsg rule create\--nametempRDPAccess \--resource-group$CLUSTER_RG\--nsg-name$NSG_NAME\--priority100\--destination-port-range3389\--protocolTcp \--description"Temporary RDP access to Windows nodes" 取得節點位址 Azure CLI Azure PowerShell ...
public FtpServerLinkedService withPort(Object port) Set the port property: The TCP port number that the FTP server uses to listen for client connections. Default value is 21. Type: integer (or Expression with resultType integer), minimum: 0. Parameters: port - the port value to set. Re...
This section provides the default settings for IP performance. Table 7-1 describes the default settings for IP performance. Table 7-1 Default settings for IP performance Parameter Default Setting Source IP address verification Disabled IP packet fragmentation on outbound interface Disabled Fa...
An IPv6 packet has three parts: an IPv6 basic header, one or more IPv6 extension headers, and an upper-layer protocol data unit (PDU). An upper-layer PDU is composed of the upper-layer protocol header and its payload, which maybe an ICMPv6 packet, a TCP packet, or a UDP packet. ...
By default, Terminal Servers use the Remote Desktop Protocol (RDP) via Transmission Control Protocol (TCP) port 3389. Configured properly, each session is authenticated using Windows domain authentication and is bidirectionally encrypted with the 128-bit RC4 crypto algorithm. The kernel supports multiple...
ClickAdd Portand specify the TCP or UDP port name and number and, if needed, its scope. ClickOKto save changes to the exception. NoteYou cannot configure an exception based on an IP protocol. To determine the set of TCP or UDP ports to configure as exceptions, see the program's user ...
Protocol Destination Port Allow or Deny Description For AD or ADFS servers IP address of an AD or ADFS network in the IDC TCP AD or ADF port Allow Allows access to AD or ADFS servers in IDCs. * 0.0.0.0/0 Any Any Deny Denies all outbound traffic that is not processed based on preset...
TcpConfig Constructor Python复制 TcpConfig(*, name: str, port: int, destination, **kwargs) Parameters NameDescription name Required str Required. tcp gateway config name. port Required int Required. Specifies the port at which the service endpoint below needs to be exposed. ...