AMS-H-6875A SAE AMS-H-6875A - 2 - 1.1.1 Limitations: Unless otherwise specified, this specification is not applicable to heating or to intermediate (non-final) heat treatment, of raw material, e.g. for hot working. Processes not covered include deliberate surface heat-treating and speci...
SAE AMS-H-6875B-2019 适用范围 本规范涵盖了四类钢的热处理要求以及炉设备、试验程序的要求以及热处理程序、热处理温度和材料试验程序的信息。本规范仅适用于原材料的热处理;它不包括钢件热处理的要求。本规范还描述了程序,当遵循这些程序时,将在表IA、IB、IC和ID中列出的相应合金的限制内产生所需的性能和材...
SAE AMS-H-6875 REV B
标准全文 点击打开全屏PDF预览 点击查看大图 标准号 SAE AS81819/1A-2010 2010年 总页数 3页 发布单位 美国机动车工程师协会 当前最新 SAE AS81819/1A-2010 引用标准 ANSI/ASME B 46.1-2009ASME Y14.5M-1994ASTM A967-05SAE AMS-H-6875-1998SAE AMS-QQ-P-416-2000SAE AMS2417SAE AMS2759SAE AMS5630SAE...
403 SAE AMS-H-6875C-2020 2020-09-01 English Heat Treatment of Steel Raw Materials 404 SAE AS85049/143B-2020 2020-09-01 English CONNECTOR ACCESSORIES, BACKSHELL, STRAIN RELIEF, CATEGORY 4C (FOR AS81714, SIZE 22, 20, AND 16 TERMINAL JUNCTION BLOCKS) ...
HEAT TREATMENT OF STEEL, PROCESS FOR (SUPERSEDING MIL-H-6875G) (S/S BY SAE-AMS-H-6875A)doi:MIL MIL-H-6875H
Forgings: Normalized and tempered in accordance with AMS-H-6875 having hardness not higher than 311 HB, or equivalent (See 8.3). Mechanical Tubing: Annealed, normalized and tempered, or cold finished having hardness not higher than 33 HRC, or equivalent (See 8.3). Forging Stock: As ordered ...
Steel When additional processing is required to comply with hardness requirements of , the heat treatment shall be in accordance with AMS-H-6875 or AMS2759/3. 3.2.2 Additional Physical Properties of Steel Low Alloy Steel Unless otherwise specified on the applicable drawings, the hardness of the ...
SAE AMS 2750G-2022 高温测量法 Pyrometry 高温测量法.pdf,AEROSPACE AMS2750™ REV. G INTERNATIONALa MATERIAL SPECIFICATION Issued 1980-04 Revised 2022-06 Superseding AMS2750F Pyrometry RATIONALE AMS2750G resu lts from a Two-Year Review and update of this
1. MATERIAL: BALL: PH13-8 Mo STEEL ALLOY PER AMS 5629, CONDITION H1000. RACE: 17-4 PH STEEL ALLOY PER AMS 5643. LINER: PTFE SHALL BE INCLUDED IN THE LINER. 2. SURFACE TEXTURE: BALL DIA Ra 8 MAX; BALL FACES AND RACE DIA Ra 32 MAX; ALL OTHER METALLIC SURFACES Ra 125 MAX...