like other powders that originated for shotguns but work as well or better for handguns. That load is of the target or practice variety, in terms of velocity. It pushes the Lee bullet to 1003 fps out of my Taurus G3c’s 3.26-inch barrel, and gets closer to 1100 fps out of a longer...
My go-to .357 load is a Lee cast 160-grain semi-wadcutter over 7.1 of Hodgdon Long Shot powder. It gives me almost 1200 fps out of a 4-inch-plus barrel, and around 1100 out of a three-incher. It lets you know you’ve touched off something more than a target load. I have shot...
The Competition Government Model sports a 6 7/8 inch slab-side barrel, wears target grade adjustable sights, is drilled and tapped for scope mount and rings (which are included with the pistol) and is made from corrosion resistant stainless steel. Weighing in at 45 ounces, this pistol is no...
ounce for ounce, of all modern firearms. This Ruger gave excellent results. At 25 yards, groups were centered into an inch. The average 10/22 is good for 2 inches at 50 yards. The 10/22 M1 is a winner.
Ruger's offered us 5.5 and 7.5-inch barrels, in all three of the major magnum calibers and the .45 Colt, but never a standard factory 4-inch bar- rel in any of those calibers. If you were a fan of Ol' Red and wanted a shorter tube, you had to have one whacked off by a ...
The model offered in this Sweepstakes is chambered in .45 Colt and features a Hogue~? Monogrip~? with 4.2-inch barrel. It has an overall length of 9.5 inches and weighs 46 ounces. 展开 年份: 2016 收藏 引用 批量引用 报错 分享
Place the rod end of the recoil spring/ guide rod in its corresponding hole in the front of the frame, under where the barrel will sit. Place the slide over the spring and barrel, making sure that each of those is seated in its correct hole at the end of the slide. ...