原文来自于rtklibexplorer的博客文章《Updated guide to the RTKLIB configuration file》,首先用谷歌翻译进行粗翻译,然后对个别词句做了修改,部分地方做了意译。翻译仅仅为个人阅读方便,有错误的地方还请指出。 目录 自从我上一次更新RTKLIB配置文件指南到现在已经有一段时间了。自上次更新以来,我在代码中又添加了一些新...
configuration file. In this case, command line options precede options in the configuration file. For the configuration file, refer B.4. 第一个RINEX OBS文件包含(Rover)观测接收机。对于相对模式,第二RINEX文件应包含参考OBS(基站)接收机的观测。至少一个RINEX导航/ gnav / hnav文件应包括在输入文件。使...
print help 打印帮助列表-k file input options from configuration file[off]从配置文件导入配置-o file set output file[stdout]设置输出文件-ts ds ts start day/time(ds=y/m/d ts=h:m:s)[obs start time]观测文件开始时间 年月日+时分秒-te de te end day/time(de=y/m/d te=h:m:s)[obs en...
the combined cost for receiver and antenna increases from $63 for the previous configuration to $81 for the new configuration, but given the improvement in performance, I suspect this is well worth it and is still significantly less expensive than the u-blox alternative. ...
shutdowncommandontheconsoleorsendtheUSR2signaltotheprocess.Forconfigurationfile,referB.4. 通过rtklib的实时‐时间定位命令行版本,启动或停止RTK服务器,配置选项或打印解决方案/状态,登录控制台, 输入命令。作为默认使用的是标准输入/输出,为控制台。使用‐P选项为Telnet协议的网络登录。要显示可用 ...
I won't try to give a comprehensive explanation of all the input options here, but will explain the ones I have found useful to adjust in my experiments and include a little about why I chose the values I did. I describe them as they appear in the configuration file rather than how th...
For configuration file, refer .通过rtklib的实时-时间定位命令行版本,启动或停止RTK服务器,配置选项或打印解决方案/状态,登录控制台,输入命令。作为默认使用的是标准输入/输出,为控制台。使用-P选项为Telnet协议的网络登录。要显示可用的命令,输入“”或在控制台上的帮助。最初的处理选项从默认的配置文件加载。更改...
For configuration file, refer B.4. OPTIONS -s -p port -m port -d dev -o file -r level -t level start RTK server on program startup port number for telnet console port number for monitor stream terminal device for console configuration file output solution status file (0:off,1:states,...
Currently, only the second of the first four numeric parameters is used and that is set to to the configuration layer to write to. In this case “1” writes to the RAM layer. Use “4” to write to the flash layer or “5” to write to both flash and RAM. “2” is used to ...
一般情况下,一个从AppWizard创建的工程中包含的Debug Configuration自动包含调试信息,但是是不是Debug版本并不是程序包含调试信息的决定因素,程序设计者可以在任意的Configuration中增加调试信息,包括Release版本。 打开Project settings对话框(可以通过快捷键ALT+F7打开,也可以通过IDE菜单Project/Settings打开) 选择C/C++页,...