Cloud Studio代码运行 struct rt_uart_ops{rt_err_t(*configure)(struct rt_serial_device*serial,struct serial_configure*cfg);rt_err_t(*control)(struct rt_serial_device*serial,int cmd,void*arg);int(*putc)(struct rt_serial_device*serial,char c);int(*getc)(struct rt_serial_device*serial);rt...
rt_err_t (*tx_complete)(rt_device_t dev, void *buffer);//发送回调函数 const struct rt_device_ops *ops;//设备操作方法} struct rt_device_ops{ rt_err_t (*init) (rt_device_t dev);//初始化 rt_err_t (*open) (rt_device_t dev, rt_uint16_t oflag);//打开 rt_err_t (*close)...
rt_err_t (*tx_complete)(rt_device_t dev, void *buffer); #ifdef RT_USING_DEVICE_OPS const struct rt_device_ops *ops; #else /* common device interface */ rt_err_t (*init) (rt_device_t dev); rt_err_t (*open) (rt_device_t dev, rt_uint16_t oflag); rt_err_t (*close) ...
然后是配置两个参数,一个在board.h里,定义BSP_USING_ON_CHIP_FLASH,一个是在stm32xxxx_hal_config.h里定义HAL_FLASH_MODULE_ENABLED,这个步骤在board.h里面可以看到: /** if you want to use on chip flash you can use the following instructions. * * STEP 1 define macro related to the on chip f...
(rt_device_tdev,rt_off_tpos,void*buffer,rt_size_tsize);rt_size_t(*write) (rt_device_tdev,rt_off_tpos,constvoid*buffer,rt_size_tsize);rt_err_t(*control)(rt_device_tdev,intcmd,void*args);#endif#ifdefined(RT_USING_POSIX)conststructdfs_file_ops*fops;structrt_wqueuewait_queue;#...
Add RT_DEVICE_CTRL_RTC_GET_TIMEVAL and RT_DEVICE_CTRL_RTC_SET_TIMEVAL ops Remove RT_DEVICE_CTRL_RTC_GET_TIME_US and RT_DEVICE_CTRL_RTC_SET_TIME_US. Add RT_DEVICE_CTRL_RTC_GET_TIMEVAL and RT_DEVICE_CTRL_RTC_SET_TIMEVAL. The RT_DEVICE_CTRL_RTC_GET_TIMEVAL cmd can get second time ...
const struct dfs_file_ops *fops; struct rt_wqueue wait_queue; #endif void *user_data; /**< device private data */ }; 2.1.1 设备类型 type 设备对象的控制块中对于设备类型使用了一个rt_device_class_type枚举的方式,其可能的设备类型如下(简单的没有注释,还有部分吗不太清楚的,以后更新): ...
而设备驱动框架层,提供了ops操作接口,分别以下的接口需要驱动开发者实现注册。 (二)创建hwtimer设备 对hwtimer设备来说,在驱动开发时,需要先从rt_hwtimer_t结构中派生出新的hwtimer设备模型,然后根据自己的设备类型定义私有数据域。 同样先楫的hwtimer drivers也定义了自己的由rt_hwtimer_t派生出来的hwtimer设备。
从RT-Thread v3.0.4版本到v3.1.0版本,总计有约470个提交,新增约8.5万行代码,移除了19万行代码。主要有以下调整:内核:增加内核对象类型检查,增加device_ops接口,从内核中移除应用模块(到组件中,并重写管理部分代码);组件:增加SAL、AT组件;BSP:增加对realtek rtl8710bn wifi soc,树莓派2B ...
/*for i2c bus driver*/ struct rt_i2c_bus_device { struct rt_device parent; /*继承了rt_device*/ const struct rt_i2c_bus_device_ops *ops; /*I2C设备的操作方法*/ rt_uint16_t flags; /*I2C设备参数*/ rt_uint16_t addr; /*I2C设备地址*/ struct rt_mutex lock; /*互斥量*/ rt_uint32...