root@ACU:~# cat /etc/config/qos # QoS configuration for OpenWrt # INTERFACES: config interface wan option classgroup "Default" option enabled 0 option upload 128 option download 1024 # RULES: config classify option target "Priority" option ports "22,53" option comment "ssh, dns" config clas...
首先在rutQos_qMgmtQueueConfig函数中完成了对QMgmtQueueObject对象的相关Qos参数的设置,之后调用devCtl_xtmSetConnCfg函数试图将所配置的参数写进ATM设备中,之后进入bcmxtmcfg_ioctl中的DoSetConnCfg函数,然后是BcmXtm_SetConnCfg函数,一次类推,最后是通过DoSetTxQueue函数完成最后的配置,整个逻辑流程如下: ATM TC: Ru...
loc.nguyen Level 1 06-22-2024 08:55 AM Hi, I am working on replacing a switch stack to a new one. There is a section relate to QoS. I think the old switch has some configuration relates to QoS but it doesn't configure properly. Can I just ignore the config for QoS? Please...
三种Qos 在调度和底层表现上都不一样: 1、在调度时调度器只会根据 request 值进行调度; 2、二是当系统 OOM上时对于处理不同 OOMScore 的进程表现不同,OOMScore 是针对 memory 的,当宿主上 memory 不足时系统会优先 kill 掉 OOMScore 值低的进程,可以使用$ cat /proc/$PID/oom_score查看进程的 OOMScore。
Device(config)# policy-map policy1 Device(config-pmap)# class class1 Device(config-pmap-c)# police cir 1000000 bc 1000 conform-action transmit exceed-action set-dscp-transmit dscp table EXEC_TABLE Device(config-pmap-c)# exit 次に、ポリシー マップに...
switch(config-cmap-qos)# ポリシー マップ コンフィギュレーション: switch# conf t Enter configuration commands, one per line. End with CNTL/Z. switch(config)# policy-map type qos setpol switch(config-pmap-qos)# class cos...
I added a || true to the if statement and it seems to solve the issue, but it would be really great to have a checkbox either in the out node or server config (better) so that future upgrades will not break things. NorbNorb commented Apr 23, 2024 Hi, Are there any updates here...
config class "Bulk" option avgrate 1 option packetdelay 200 root@ACU:~# tc qdisc del dev eth0 root tc qdisc add dev eth0 root fq_codel target 60ms interval 360ms noecn tc qdisc show dev eth0 IFB是tc过滤器的替代选择,用于处理入口流量,方法是将其重定向到虚拟接口并将其视为出口流量。每...
在mqttclient/common/log/config.h配置文件中打开对应的日志输出级别:#define BASE_LEVEL (0) #define ASSERT_LEVEL (BASE_LEVEL + 1) /* 日志输出级别:断言级别(非常高优先级) */ #define ERR_LEVEL (ASSERT_LEVEL + 1) /* 日志输出级别:错误级别(高优先级) */ #define WARN_LEVEL (ERR_LEVEL + 1...
1.1.1 acl acl命令用来创建ACL,并进入ACL视图。如果指定的ACL已存在,则直接进入ACL视图。 undo acl命令用来删除指定或全部ACL。 【命令】 acl [ ipv6 ] { advanced | basic } { acl-number | name acl-name } [ match-order { auto | config } ] acl mac { acl-number | name acl-name } [ matc...