V21注:1)液压试验时风载荷HI( 液压试验时风载荷 ) = Ratio * Operating wind load( 操作工况下风载 )其中: Ratio 为液压试验时 ,风载荷占操作工况的百分比。要在输入风载数据时输 入该百分比。2)液压试验时地震载荷HE( 液压试验时地震载荷 ) = Ratio * Oper 32、ating Earthquake load( 操作工况下地震 ...
V17注:1)液压试验时风载荷HI(液压试验时风载荷) = Ratio * Operating wind load(操作工况下风载)其中:Ratio为液压试验时,风载荷占操作工况的百分比。要在输入风载数据时输入该百分比。2)液压试验时地震载荷HE(液压试验时地震载荷) = Ratio * Operating Earthquake load(操作工况下地震载荷)其中:Ra 31、tio为...
equal to 1 kW/m2.PRis the performance ratio, which is set to 80%.SLis the PV system lifetime ranging between 20 and 40 years, and it is set to 30 years here.LRis the
The proposed AVOA outperformed the others in terms of the power enhancement and performance ratio. The best Pe obtained via the proposed AVOA is 39.91% in the fifth shade pattern while the best PR is 82.9125% in the third pattern. Additionally, Wilcoxon sign rank, Friedman, ANOVA table, ...
This kind of rotary drive is an open gear transmission, and its front end needs to be equipped with a planetary reducer with a large reduction ratio as its power input, so it can only be called In order to expand the application range of such products and further i...
including requirements for dew and frost mitigation, azimuth and tilt angle accuracy. It also defines cleaning and calibration intervals for pyranometers. Furthermore, the standard defines requirements for measurement of module- and air temperature, wind speed and direction, soiling ratio, and (AC and...
When such modules are connected in a series chain, the converters, assuming they are controllable, permit a variable ratio between the PV cell current and the series chain current. Comparing with the traditional structure this configuration can be controlled at the individual module level and hence...
Height to Diameter ratio : = Maximum Height(length)^2 / Sum of Area of the Elements = 12284.199 (^2)/11491075 = 13.132 Vibration Frequency = 0.862 Hz Because H/D > 5 Or Freqency < 1.0: Dynamic Analysis Implemented Element O/Dia = 3 mm ...
V注:1)液压试验时风载荷HI(液压试验时风载荷) = Ratio * Operating wind load(操作工况下风载)其中:Ratio为液压试验时,风载荷占操作工况的百分比。要在输入风载数据时输入该百分比。2)液压试验时地震载荷HE(液压试验时地震载荷) = Ratio * Operating Earthquake load(操作工况下地震载荷)其中:Ratio为 31、液压...
v20注:1) 液压试验时风载荷hi(液压试验时风载荷)=ratio * operating wind load( 操作工况下风载)其中: ratio 为液压试验时,风载荷占操作工况的百分比。要在输入风载数据时输入该百分比。2)液压试验时地震载荷he(液压试验时地震载荷)=ratio * operating earthquake load(操作工况下地震载荷 )其中: ratio 为液压...