To make this work with the orangepi zero 3, theDTSneeded would be changed in the pinout, and...
https://forum.armbian.com/topic/44191-orangepi-zero-lts-ili9341-tft-lcd-and-later-orangepi-zero-3/?do=findComment&comment=204672 MyDTSis for a customized set of pins that works for me, and it is different than/from the waveshare set of pins. ...
The webcam is an UVC compatible device, which is a good news as it supported by Linux. Connect the webcam to the Orange Pi Zero Hardware As the only USB port socket on the Orange PI Zero is used by the 3D printer, I looked at the Orange PI Zero pinout: Source We can see that 2...
Orange Pi 4 LTS could make an interesting replacement, with Rockchip RK3399 a mature platform mostly supported in mainline Linux, as well as performance roughly equivalent, except for some specific tasks, where RK3399 may be significantly faster (e.g. AES encryption). The...
I connected with wires as shown in instructions: https://forum.armbian.com/topic/28674-text-version-of-orange-pi-zero-pinout/ And the LCD's LED input pin to 3.3V I activated the spi-add-cs1 overlay in arbian-config I copied the dts for opiZ into ~/ili...
I am experimenting with a cheap ILI9341 screen and mi OrangePi Zero LTS https://www.aliexpress.us/item/2251832431328471.html I found these recent instructions to be able to display graphics here: https://ryjelsum.me/homelab/xpt2046-ili9341-opi-zero/ with