As the only USB port socket on the Orange PI Zero is used by the 3D printer, I looked at the Orange PI Zero pinout: Source We can see that 2 USB port pins are available (USB-Dx2 / USB-Dx3). I chose to use the USB-DM2 / USB-DP2 as they are close to 5V and GND pins. I ...
I connected with wires as shown in instructions: https://forum.armbian.com/topic/28674-text-version-of-orange-pi-zero-pinout/ And the LCD's LED input pin to 3.3V I activated the spi-add-cs1 overlay in arbian-config I copied the dts for opiZ into ~/ili9...
3, The OrangePI zero wiring The bad news is that the Orange PI pinout is NOT the same as the Raspberry PI 0/1/2/3 and there is even difference between other Orange PI models. The best way to go is get the wiring library (Orange PI Zero version). The image might be a bit confus...
2. What does it mean to directly connect the 13 pin connector on OPi0 to GND and TVout (= Video?) ? What cable/leads? Is there a link for the 13 pin connector pinout description for GND and one/several TVout (s)? The RCA cable is between the TRRS port on the expansion b...
I have also a Orange PI and the same touchscreen 3.5'', but only I get the white screen as some of you, I have now flashed Armbian (on the post says Orangepipc, but I have downloaded Orangepizero, which one is it?) into my Orange Pi's SD Card and I will try...
I connected with wires as shown in instructions: https://forum.armbian.com/topic/28674-text-version-of-orange-pi-zero-pinout/ And the LCD's LED input pin to 3.3V I activated the spi-add-cs1 overlay in arbian-config I copied the dts for opiZ into ~/ili9...