虚拟接口创建完成后,查看各接口状态,是否拨号成功,是否从运营商处获取了IP地址。我在开始操作时,没有执行1.2步,此步创建的各接口都报错“device_claim_failed”,大家要注意一下。到此,第一部分操作完成,路由器就可以多拨,能同时与运营商创建多条连接了。 第二部分:安装插件,配置负载均衡。此部分的目的是,让路由...
如果重启后dockerman的luci显示依旧异常,可以考虑安装luci-compat,如果dockerman的配置子项下一片空白,ssh登上去查看/etc/config下是否有一个dockerd-opkg文件,重命名为docker。 使用macvlan前要先安装kmod-macvlan,不然生成后接口会提示DEVICE_CLAIM_FAILED。 docker-网络,新建。注意此处子网,网关,ip范围要和lan口不同。
name: OpenWrt_firmware${{ env.DEVICE_NAME }}${{ env.FILE_DATE }} path: ${{ env.FIRMWARE }} - name: Generate release tag id: tag if: env.UPLOAD_RELEASE == 'true' && !cancelled() run: | echo "release_tag=$(date +"%Y.%m.%d-%H%M")" >> $GITHUB_OUTPUT touch release.txt [...
Describe the bug The board crashes with a kernel panic as soon as the SPI device is being used. Binding the device works, but sending data does not. OpenWrt version r25404-e247763617 OpenWrt release SNAPSHOT OpenWrt target/subtarget medi...
[ 7.090000] rt2880-pinmux pinctrl.1: request() failed for pin 12 [ 7.100000] rt2880-pinmux pinctrl.1: pin-12 (pio:12) status -22 [ 7.110000] gpio-keys gpio-keys-polled.4: unable to claim gpio 12, err=-22 [ 7.130000] gpio-keys: probe of gpio-keys-polled.4 failed with error ...
首先你需要有一个可以运行linux 系统的主机 系统可以使用虚拟 打开终端,安装好开发环境git gcc make auto...
#22243: x86-64 root device can't be found ---+--- Reporter: Halry | Owner: developers Type: defect | Status: new Priority: highest | Milestone: Component: kernel | Version: Chaos Calmer 15.05 Keywords: | ---+--- {{{ [ 0.000000] Command line: BOOT_IMAGE=/boot/vmlinuz root=/dev...
Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on the Program. In addition, mere aggregation of another work ...
Anyway: this thread started with a simple claim: Replace Armbian userland with OpenWRT's and magically XR819 Wi-Fi is fixed (see page 1 and @hyphop's posts). While those people looking into the driver came to different conclusions: https://forum.armbian.com/index.php/topic/2808...
虚拟接口创建完成后,查看各接口状态,是否拨号成功,是否从运营商处获取了IP地址。我在开始操作时,没有执行1.2步,此步创建的各接口都报错“device_claim_failed”,大家要注意一下。到此,第一部分操作完成,路由器就可以多拨,能同时与运营商创建多条连接了。