支持CMSIS-DAP v2接口协议,支持ARM、RISCV、ESP32等目标芯片,详见Wiki及release - vllogic/openocd_cmsis-dap_v2
支持CMSIS-DAP v2接口协议,支持ARM、RISCV、ESP32等目标芯片,详见Wiki及release - openocd_cmsis-dap_v2/src/server/rtt_server.c at 53e67c37abee6506bb06eaf0d50d4d9ce045c0c8 · vllogic/openocd_cmsis-dap_v2
interface cmsis-dap transport select swd source [find target/k60.cfg] adapter_khz 100 msys2给我安装了最新的openOCD(0.10.0)。 $ openocd -f ocd-k60.cfg Open On-Chip Debugger 0.10.0 Licensed under GNU GPL v2 For bug reports, read http://openocd.org/doc/doxygen/bugs.html Info : add ...
用cmsis-dap时进行openocd时报错,如下。 是不是官方安装软件内安装的openocd不支持cmsisi-dap?需要重新编译一下openocd? Open On-Chip Debugger v0.10.0-esp32-20210401 (2021-04-01-15:46) Licensed under GNU GPL v2 For bug reports, read http://openocd.org/doc/doxygen/bugs.html Error: The ...
CMSIS-DAP v2 (USB bulk based) adapter driver Nuvoton Nu-Link and Nu-Link2 adapter drivers NXP IMX GPIO mmap based adapter driver ST-Link consolidate all versions in single config ST-Link read properly old USB serial numbers STLink/V3 support (for ST devices only) ...
CMSIS-DAP v2 (USB bulk based) adapter driver Nuvoton Nu-Link and Nu-Link2 adapter drivers NXP IMX GPIO mmap based adapter driver ST-Link consolidate all versions in single config ST-Link read properly old USB serial numbers STLink/V3 support (for ST devices only) ...
Using CMSIS-DAPv2 interface 1 with wrong class 10 subclass 0 or protocol 0 如果没有显式指定 CMSIS-DAP 版本的话会优先尝试 V2 接口,如果失败再尝试 V1 接口 [https://blog.csdn.net/luckly_wang/article/details/127364184] 修改cmsis-dap.cfg ...
Config Command: cmsis_dap_backend [auto|usb_bulk|hid] Specifies how to communicate with the adapter: hid Use HID generic reports - CMSIS-DAP v1 usb_bulk Use USB bulk - CMSIS-DAP v2 auto First try USB bulk CMSIS-DAP v2, if not found try HID CMSIS-DAP v1. This is the default if ...
Licensed under GNU GPL v2Forbug reports, read http://openocd.org/doc/doxygen/bugs.html adapter speed:1000kHz Info : Listeningonport6666fortcl connections Info : Listeningonport4444fortelnet connectionsError: unabletofind a matching CMSIS-DAP device ...
目标芯片配置文件是openOCD支持的目标芯片，在 scripts\\target 文件夹下；比如这里我使用ST-Link v2-1...